Sony DSC-T200 Cyber-shot&reg Handbook page 34

Shooting images easily (Auto Adjustment mode)
ISO: Selecting a luminous sensitivity
Low ISO sensitivity
Sets the ISO sensitivity.
(Auto)
• For details on the ISO sensitivity, see page 11.
• You can select only from [ISO AUTO], [ISO 80] to [ISO 400] when set to Burst or Exposure Bracket.
• When shooting under brighter conditions, the camera automatically increases its tone reproduction and
helps prevent images to become whitish (excluding when [ISO] is set to [80]).
EV: Adjusting the light intensity
Manually adjusts the exposure.
• When the shooting mode is set to
Toward –
–2.0EV
0EV
+2.0EV
• For details on the Exposure, see page 10.
• The compensation value can be set in 1/3EV increments.
• If a subject is being shot in extremely bright or dark conditions, or the flash is used, the exposure
adjustment may not be effective.
34
High ISO sensitivity
When taking a picture in a dim location or of a moving
subject, raising the ISO sensitivity (higher number) can
reduce blurring. However, higher ISO sensitivities results in
increased noise. Set the ISO sensitivity according to the
shooting conditions.
, or , [EV] appears in [MENU].
Toward +
Toward –: Darkens an image.
The exposure is determined automatically by the camera.
Toward +: Brightens an image.