Troubleshooting
Noise appears in the image when you view the screen in a dark place.
The camera is attempting to increase the visibility of the screen by temporarily brightening
•
the image under conditions of low illumination. There is no effect on the recorded image.
The eyes of the subject come out red.
Set [Red Eye Reduction] to [Auto] or [On] (page 52).
•
•
Shoot the subject at a distance closer than the flash range using the flash.
Light the room and shoot the subject.
•
Retouch the image using [Red Eye Correction] (page 58).
•
Dots appear and remain on the screen.
This is not a malfunction. These dots are not recorded (page 2).
•
Cannot shoot images in succession.
The internal memory or "Memory Stick Duo" is full. Delete unnecessary images (page 37).
•
The battery level is low. Insert charged battery pack.
•
Viewing images
Your camera cannot playback images.
Press
(Playback) button (page 35).
•
The folder/file name has been changed on your computer (page 96).
•
When an image file has been processed by a computer or when the image file was recorded
•
using a model other than that of your camera, playback on your camera is not guaranteed.
The camera is in USB mode. Delete the USB connection (page 92).
•
The date and time are not displayed.
[Display Setup] is set to [Simple] or [Image Only]. Touch [DISP] to set [Display Setup] to
•
[Normal] (page 23).
The image appears rough right after playback starts.
The image may appear rough right after playback starts due to image processing. This is not a
•
malfunction.
The icons no longer appear.
When the top right of the screen is touched, the icons will momentarily disappear. Taking
•
your finger off the screen will make the icons reappear.
[Display Setup] is set to [Image Only]. Set to [Normal] or [Simple].
•
111