Using the self-timer
101
VGA
98
1
, Set the mode selector to
and press V ( ) on the control
button.
The
(Self-timer) indicator appears on the
LCD screen.
• If the menu is currently displayed, press MENU
first to make the menu disappear.
• You can carry out this operation even when the
mode selector is set to
.
2
, Center the subject in the frame,
,
and press the shutter button
fully down.
The Self-timer lamp (page 8) will flash in
orange, and you will hear a beeping sound.
The image will be shot after approximately
10 seconds.
To cancel the self-timer during the
operation
Press V ( ) on the control button again.
The
indicator dissapears from the LCD
screen.
• If you stand in front of the camera and press the
shutter button, the focus and the exposure may
not be correctly set.
FINE
101
VGA
98
F2.8
30
27