Oki C824 Advanced Manual page 86

Item Factory
Default
Tray1 Config Paper Size Cassette Size
X Dimension 210 millimeter
or 8.5 inch * 2
Y Dimension 297 millimeter
or 11.0 inch *
Media Type Plain
Media Weight Light
Legal Paper Legal14
Other Size 16K
(184 x 260 mm
) [SEF]
Tray2/3/4/5 Paper Size Cassette Size
Config *
X Dimension 210 millimeter
* Displayed
1
or 8.5 inch *
when an
Y Dimension 297 millimeter
optional tray is
or 11.0 inch *
installed.
Media Type Plain
Media Weight Light
Legal Paper Legal14
Other Size 16K
(184 x 260 mm
) [SEF]
Paper Feed Tray1
Auto Tray Switch On
Tray Sequence Down
Duplex Last Page Skip Blank
Page
*1 Factory default setting values are different according to the country or region.
*2 The values are displayed with the unit set in [Admin Setup] > [Tray Setup] > [Unit of Measurement].
• Menu > System Adjust
Item Factory
Default
Power Save Time 1 minute
Sleep Time 15 minutes
Description
Selects a paper size for Tray 1.
Sets a width of a custom paper for Tray 1.
Sets a length of a custom paper for Tray 1.
2
Selects a paper type for Tray 1.
Selects a paper weight for Tray 1.
Sets a legal paper size for Tray 1.
Sets other standard paper size for Tray 1.
Selects a paper size for Tray 2/3/4/5.
Sets a width of a custom paper for Tray 2/3/4/5.
Sets a length of a custom paper for Tray 2/3/4/5.
1
Selects a paper type for Tray 2/3/4/5.
Selects a paper weight for Tray2/3/4/5.
Sets a legal paper size for Tray 2/3/4/5.
Sets other standard paper size for Tray 2/3/4/5.
Selects a paper tray.
Sets whether to enable the auto tray switching function.
Sets the priority of tray order for auto tray selection/auto tray
switching.
When [Skip Blank Page] is selected, the last page of an odd-
numbered duplex print job is printed in simplex.
When [Always Print] is selected, the printer always prints a
document in the duplex mode if the duplex mode is selected.
Some applications may not work properly.
Description
Sets how many minutes the printer waits before activating the
power save mode.
Sets the time to switch from the power save mode to the
sleep mode.
Item
Auto Power Off Time 4 hours
Silent Mode On
Clearable Warning ONLINE
Auto Continue Off
Manual Timeout 60 seconds
Timeout InJob 40 seconds
Timeout Local 40 seconds
Timeout Network 90 seconds
Low Toner Continue
Print Mode w/o Color Toner Alarm
Jam Recovery On
Error Report Off
Hex Dump Execute
• Menu > Print Adjust > Print Position Adjust
- 86 -
5. Management / Setting the Printer
Factory Description
Default
Sets the time to switch from the standby mode to the power
off mode.
Specifies a print preparation operation when entering standby
status from Sleep mode.
[On]: It is quiet as there is no print preparation.
[Off]: There is a rotation noise of the image to perform print
preparation but you can start first printing early.
Sets the timing for deletion of clearable warnings.
Sets whether to recover the printer automatically when a
memory overflow or tray requesting occurs.
Sets how many seconds the printer waits for the paper to be
fed from the manual paper tray.
Sets how many seconds the printer will wait before force
printing a job after the data stops coming.
Sets how long each port is left opened after a job is complete.
(The network is excluded.)
Sets how long the network port is left opened after a job is
complete.
Sets whether to continue or stop printing when a low on toner
error occurs.
Specifies the action when there is an empty color toner.
[Alarm]: The machine stops without printing the color print
job. Replace the toner cartridge with a new one.
[Cancel]: Cancels a new color print job automatically.
Replace the toner cartridge with a new one.
Sets whether the printer will attempt to re-print any pages lost
due to a paper jam once the jam has been cleared.
Sets whether to print out the error details when an internal
error occurs.
Prints out the data received from the host computer in
hexadecimal dump format.
Turning off the power switches the printer to the normal print
mode from the HEX Dump mode.