Oki C824 Advanced Manual page 83

Item Factory
Default
Job Cancel Setup Cancel Key Short
Behavior
Inquiry Display On
Focus Position Yes
Display Timeout 180
Near Life Setup Drum Near Life 3000
Timing
Fuser Near Life 2500
Timing
Belt Near Life 2000
Timing
Erase Privacy Data Execute
NFC Setup Enable
• Settings
Item Factory Default
Reset Settings Execute
Save Settings Execute
Restore Settings Execute
• Change Password
Item Factory Default
New Password -
Description
Sets the behavior responding to the job cancel button.
Short: Pressing the button (for two seconds or less)
cancels the job.
Long: Holding down the button (for two to five seconds)
cancels the job.
Off: Ignores pressing or holding down of the cancel
button.
Sets whether to display the job cancellation confirmation
window or not.
Sets which option should be focused on in the job
cancellation confirmation window, Yes or No.
Sets the display timeout value for the job cancellation
confirmation window.
Sets the timing for the near life warning for the image
drums.
Available range: 500 to 5000 count (500 count
increments)
Sets the timing for the near life warning for the fuser unit.
Available range: 500 to 5000 count (500 count
increments)
Sets the timing for the near life warning for the belt unit.
Available range: 500 to 5000 count (500 count
increments)
Deletes the registered privacy data.
• Values set to the Admin Password and other menu
items.
• Various histories
• Access control information and user information
registered to the device
Sets Enable/Disable the NFC function.
Description
Initialize the user menu settings.
Saves the current menu settings. The existing menu
settings are overwritten.
Restores menu settings by the stored menu settings.
Description
Sets a new password to enter the [Admin Setup] menu.
Item Factory Default
Verify Password -
- 83 -
5. Management / Setting the Printer
Description
Enters the new password set in [New Password] to
verify.