Oki C824 Advanced Manual page 82

Item Factory Default
Panel Contrast 0
Touch Key Calibration Execute
• Buzzer Setup
Item Factory Default
Key Touch Tone Volume Low
Error Volume Off
Print Completion Buzzer Volume Off
AirPrint Buzzer Volume Low
Card Hold Buzzer Volume Low
• Time Setup
Item Factory Default
Date Format dd/mm/yyyy or mm/
dd/yyyy * 1
Time Zone +00:00
Daylight Saving Off
Setting method Manual Setup
SNTP Server (Primary) ************
SNTP Server (Secondary) ************
Time Setting 01/01/2000
*1 : Factory default setting values are different according to the country or region.
• Power Setup
Item Factory Default
Auto Power Off Auto Config
Peak Power Control Off
• Tray Setup
Item Factory Default
Unit of Measurement millimeter or inch *
Description
Adjusts the contrast of the LCD of operation panel.
Adjusts the sensitivity of the touch keys. Do not operate
during the calibration.
Description
Sets the buzzer volume of the key-touch tone.
Sets the buzzer volume when error occurred.
Set the buzzer volume when print complete.
Sets the buzzer volume when the AirPrint confirmation
operation.
Set the buzzer volume to be heard when holding IC Card
over card reader.
Description
Sets the date display format.
Sets the time zone (difference from GMT).
Available range: -12:00 to +13:00 (15 minutes /
increment)
Sets whether to enable the Daylight Saving mode.
Sets the time setup method.
Sets the primary SNTP server.
Sets the secondary SNTP server.
Sets the current date and time manually.
Description
Sets the behavior of Automatic Power Off.
If it is set to [On], the machine acts to lower its maximum
energy consumption. Note that the machine may take
longer to start up or maximum printing speed may lower.
Description
1
Specifies the unit of custom paper size.
Item Factory Default
Default Paper Size A4 or Letter *
*1 : Factory default setting values are different according to the country or region.
• Others Setup
Item
Paper Feed Roller MP Tray Clear
Counter Clear
Tray1 Clear
Tray2 Clear
Tray3 Clear
Tray4 Clear
Tray5 Clear
Flash Memory Setup Initialize
Format Partition PCL
Job Log Setup Save Job Log
Clear Job Log
Security Setup Access Control Disable
User Counter
Report
Language Setup Select
Language
Language
Initialize
- 82 -
5. Management / Setting the Printer
Description
1 Sets the default paper size.
Factory Description
Default
Execute When the paper feed rollers in the MP tray are replaced,
clear the counter.
Execute When the paper feed rollers in the tray 1 are replaced,
clear the counter.
Execute When the paper feed rollers in the tray 2 are replaced,
clear the counter.
Execute When the paper feed rollers in the tray 3 are replaced,
clear the counter.
Execute When the paper feed rollers in the tray 4 are replaced,
clear the counter.
Execute When the paper feed rollers in the tray 5 are replaced,
clear the counter.
Execute Initializes Flash Memory.
Formats a specified partition.
Disable Sets Enable/Disable the saving job logs.
Execute Clears the saved job logs.
Sets the Access Control.
Execute Prints the user counter report.
English Selects display language for the LCD panel and Report
Prints.
(Simplified Chinese, Chinese (Traditional) and Korean:
Report Prints is in English.)
Execute Initializes the Language setup.