Sony Cyber-shot DSC-F77A Operating Instructions Manual page 99

(SETUP 1)
Item Setting
LCD BRIGHT/
BRIGHTNESS xNORMAL/ DARK
LCD BACKLIGHT BRIGHT/
x NORMAL
BEEP
SHUTTER
x ON
OFF
POWER SAVE x ON / OFF
(SETUP 2)
Item Setting
FILE NUMBER x SERIES
RESET
USB CONNECT PTP/xNORMAL
VIDEO OUT NTSC
PAL
LANGUAGE
—
CLOCK SET OK / CANCEL
Description
Selects the LCD brightness. This has no effect on the recorded images.
Selects the brightness of the LCD backlight. Selecting [BRIGHT] makes the screen bright and easy to
see when using the camera outdoors or in other bright locations, but also uses up the battery charge
faster. Displayed only when you are using the camera with the battery pack. When [POWER SAVE] is
set to [ON], this item cannot be shown.
– Turns on the shutter sound when you press the shutter button.
– Turns on the beep/shutter sound when you press the control button/ press the shutter button.
– Turns off the beep/shutter sound.
Selects whether to use the POWER SAVE mode (page 10). Displayed only when you are using the
camera with the battery pack.
Description
– Assigns numbers to files in sequence even if the "Memory Stick" is changed or the recording folder
is changed.
– Resets the file numbering and starts from 0001 each time the folder is changed. (When the recording
folder contains a file, a number one higher than the largest number is assigned.)
Switches the USB mode (page 68).
– Sets the video output signal to NTSC mode (e.g., Japan, USA).
– Sets the video output signal to PAL mode (e.g., Europe).
Displays the menu items, warnings and messages in selected language.
Sets the date and time (page 14).
99