Installing "Imagemixer; Connecting Your Camera To Your Computer - Sony Cyber-shot DSC-F77A Operating Instructions Manual

Installing "ImageMixer"

a Click [PIXELA ImageMixer] on
the title screen.
The "Choose Setup Language" screen
appears.
• You can use the "PIXELA ImageMixer for
Sony" software to copy, view and edit images.
For details, see the software's help files.
b Select the desired language,
then click [OK].
The "Welcome to the InstallShield
Wizard" screen appears.
• This section describes the English screen.
c Follow instructions on each
succeeding screen.
When installation is complete, the
"Read Me" text appears. Read the text,
then close the window by clicking
at the upper right corner of the screen.
After that, click [Finish] in the install
screen to close the install screen.
• If DirectX8.0a or a later version is not installed
in your computer, the "Information" screen
appears. Follow the procedure on the screen.
d Remove the CD-ROM.
Connecting your camera to
your computer
a Turn on your computer.
b Insert the battery pack and the
"Memory Stick" with the
images you want to copy into
the camera.
• Be sure to use the fully charged battery pack. If
you copy images using an insufficient battery,
copying images may be aborted or the data may
be corrupted due to battery shutoff.
• For further details on the battery pack, see page
8.
• For further details on the "Memory Stick," see
page 16.
71