Ironman Fitness 5402 Owner's Manual page 13

Step 4:
Mount the Bed Frame (4) to the Rear U-Frame (2) by inserting the ends of the
Pivot Arms (5) into the channels on the plates. The slotted portion of the rollers
on the end of the Pivot Arms (5) should be inserted into the channels on the
plates.
11
9
31
Step 5:
Slide the Steel Heel Holder Brackets (7) and Rubber Heel Holders (31) onto
both ends of the Rear Rod (9) until the lock teeth are wedged into the slots in
Rear Rod (9) as shown in small figure. Use the same procedure to attach the
Other Steel Heel Holder Brackets (7) and Rubber Heel Holders (31) onto the
other ends of the Front Rod (11).
NOTE: Make sure the lock teeth are wedged into the slots in the Rear and Front
Rods (9, 11) to lock the Steel Heel Holder Brackets (7) and Rubber Heel
Holders (31) in place before use.
2
5
7
31
3
31
31 31
7
ASSEMBLY
7
9
31 31
7
11
7
31 31
11 11
31 31
7