Flywheel And Housing - Perkins 1000 Series Workshop Manual

Data and dimensions
Note: This information is given as a guide for personnel engaged on engine overhauls. The dimensions
which are shown are those which are mainly used in the factory. The information applies to all engines,
unless an engine type code is shown.

Flywheel and housing

Limits for flywheel housing run-out and alignment (total indicator reading)
Diameter of housing flange bore
mm
362
410
448
511
584
648
787
Perkins Phaser/1000 Series, April 1995
FLYWHEEL AND FLYWHEEL HOUSING
Maximum limit (total indicator reading)
in
14.25 0,23
16.14 0,25
17.63 0,28
20.11 0,30
22.99 0,36
25.51 0,41
30.98 0,48
mm in
0.009
0.010
0.011
0.012
0.014
0.016
0.019
22
22A.05