Shooting menu
Contrast: Adjusting the contrast
Adjust the contrast of the image.
(–)
(Normal)
(+)
(DRO)
Sharpness: Adjusting the sharpness
Adjust the sharpness of the image.
(–)
(Normal)
(+)
SteadyShot: Selecting the anti-blur mode
Selects the anti-blur mode.
(Shooting)
(Continuous)
(Off)
• In Auto Adjustment mode, the anti-blur mode will be set to [Shooting].
• For movies, the options are limited to [Continuous] and [Off].
The default setting is set to [Continuous].
• The anti-blur function may not work properly in the following cases.
– When camera shake is too strong
– When the shutter speed is slow, for example, shooting night scenes
60
For details on the operation 1 page 49
Toward –: Reduces the contrast.
Toward +: Enhances the contrast.
Adjusts the contrast of the image automatically.
• When using flash, if [Metering Mode] is set to [Center] or
[Spot], the contrast will not be adjusted automatically.
Toward –: Softens the image.
Toward +: Sharpens the image.
Activates the anti-blur function when pressing the shutter
button halfway down.
Always activates the anti-blur function. You can stabilize
images even when zooming up a far subject.
• Battery consumption is faster than in [Shooting] mode.
Does not use anti-blur mode.