Step 4: Adjustingthe Lcdpanel And Viewfinder; Adjusting The Lcd Panel; Adjusting The Viewfinder - Sony HANDYCAM DCR-TRV361 Operation Manual

Step 4: Adjustingthe
LCDpanel and
viewfinder
You can adjust the angle and brightness of
the LCD panel to meet various recording
situations.
Even when there are obstructions between you
and the subject, you can check the subject oll the
LCD screen during recording by adjusting the
angle of the LCD panel.
[MENU], _ (STANDARD
SEt)
menu,
then touch [LCD SET] (p. 78).
3 Adjust the item with [[[_]1[[[_], then
touch[_.
"_" Tips
• If you mtale the LCD panel 180 degrees to the lens
side, you can close the LCD panel with lhe LCD
screen Pacing out.
• If you are using the baltery pack |br power source,
you can adjust the brightness by selecling [LCD BL
LEVEL] from lhe [LCD SET] oll the _
(STANDARD SET) menu (p. 78).
• Even if you adjust the LCD screen backlight, the
recorded picture will not be affected.
• You can turn offthe operation confirmation beep by
setting [BEEP] in the _ (STANDARD SET)
menu to [OFF] (p. 81).
Maximum
180 degrees
You can view images using the viewfinder
when you close the LCD panel. Use the
viewfinder when the battery is running out, or
when the screen is hard to see.
Maximum
90 degrees
Press OPEN and open the LCD panel.
Open the LCD panel 90 degrees to the
camcorder, then rotate it to the desired
position.
To adjust the brightnessof the LCD
screen
1
Touch _.
2 Touch [LCD BRIGHT].
if the flem is not displayed on the screen,
touch [_/[_. If you cannot find it, touch
Viewfinder lens adjustment tever
Lift up the viewfinder.
Adjust the viewfinder lens adj astment
lever until the picture is clear.
18 Getting started