Table of Contents
Advertisement
Viewing menu
(Retouch): Retouching still images
Adds effects or makes corrections to a recorded image and records it as a new file. The
original image is retained.
To retouch the still images
1 Select the images you want to retouch while displaying in single-image.
2 Press the MENU button.
3 Select [Retouch] with v/V on the control button, then press z after selecting the desired mode
with b/B.
4 Retouch the images following the instructions for each retouching mode below.
• The retouched images may not be displayed by the [Filter by Faces] (page 79).
(Trimming)
(Red Eye Correction)
For details on the operation 1 page 60
Playback zoom is performed on the image and part of the image is
cropped.
1 Press W/T to zoom in on the trimming range.
2 Set the point with v/V/b/B, then press the MENU button.
3 Select [Image Size] with v/V, then press z.
Select an image size to record with v/V, then press z again.
4 Select [OK] with v/V, then press z.
• The image size that you can trim may vary depending on the image.
• The quality of trimmed images may deteriorate.
Corrects the red-eye phenomenon caused by flash.
Select [OK] with v/V, then press z.
• You may not be able to correct the red-eye phenomenon depending
on the image.
81
Advertisement
Table of Contents
