ViewSonic VE710b-1 Service Manual page 63

2.11 T ake out the screws on M/B & remove the cable between M/B & power board (Figure 15)
2.12 Remove the M/B out (Figure 16)
2.13 Put the PCB holder up-side-down & remove the screws on the power board (Figure 17)
2.14 Remove the power board (Figure 18)
Figure 17
2.15 Separate the bezel & panel (with BKT) & remove the cable on panel (Figure 19)
2.16 Take off the L/R BKT & remove the L/R BKT . (Figure 20)
Figure 19
ViewSonic Corporation
Figure 15 Figure 16
Figure 18
Figure 20
Confidential - Do Not Copy
60
VE710b/s-1