Sony Trinitron KV-32FV27 Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. TV
  5. TRINITRON KV-32FV27
  6. Service manual
Sony Trinitron KV-32FV27 Service Manual

Sony Trinitron KV-32FV27 Service Manual

Aa-2u chassis
Hide thumbs Also See for Trinitron KV-32FV27:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL

MODEL NAME
KV-32FV27
KV-32FV27
Sony KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17
www.electronicsrepair.net
9-965-901-01
REMOTE COMMANDER
DESTINATION
RM-Y182
RM-Y182
KV-36FV27
TRINITRON
AA-2U
CHASSIS NO.
US
SCC-S44KA
CND
SCC-S45GA
RM-Y182
®
COLOR TELEVISION
Sel f Di a gnosi s
Supported model
CHASSIS

Advertisement

Table of Contents

Troubleshooting

loading

Related Manuals for Sony Trinitron KV-32FV27

Summary of Contents for Sony Trinitron KV-32FV27

  • Page 1: Service Manual

    Sel f Di a gnosi s Supported model AA-2U SERVICE MANUAL CHASSIS MODEL NAME REMOTE COMMANDER DESTINATION CHASSIS NO. KV-32FV27 RM-Y182 SCC-S44KA KV-32FV27 RM-Y182 SCC-S45GA Sony KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 www.electronicsrepair.net KV-36FV27 RM-Y182 ® TRINITRON COLOR TELEVISION 9-965-901-01...

  • Page 2: Table Of Contents

    KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 TABLE OF CONTENTS SECTION TITLE PAGE Specifi cations............................3 Warnings and Cautions........................4 Safety Check-Out..........................5 Self-Diagnostic Function........................6 1. Disassembly 1-1. Rear Cover Removal........................8 1-2. Chassis Assembly Removal......................8 1-3. Service Position ..........................8 1-4. Picture Tube Removal ........................9 Anode Cap Removal Procedure....................9...

  • Page 3: Specifi Cations

    The ( ) SRS (SOUND RETRIEVAL SYSTEM) is manufactured by Optional Assessories Sony Corporation under license from SRS Labs, Inc. It is covered by U.S. AV Cable: VMC-810/820/830 HG Patent No. 4,748,669. Other U.S. and foreign patents pending. Audio Cable: RKC-515HG Component Video Cable: VMC-10/30 HG •...

  • Page 4: Warnings And Cautions

    Ne les remplacer que par des composants Sony dont le numero de piece est indique dans le present manuel ou dans des supplements publies par Sony. Les reglages de circuit dont l’importance est critique pour la securite du fonctionnement sont identifi...

  • Page 5: Safety Check-Out

    KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 SAFETY CHECK-OUT Leakage Test After correcting the original service problem, perform the following The AC leakage from any exposed metal part to earth ground and from safety checks before releasing the set to the customer: all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes).

  • Page 6: Self-Diagnostic Function

    KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 Self Diagnosis SELF-DIAGNOSTIC FUNCTION Supported model The units in this manual contain a self-diagnostic function. If an error occurs, the STANDBY/TIMER LED will automatically begin to fl ash. The number of times the LED fl ashes translates to a probable source of the problem. A defi nition of the STANDBY/TIMER LED fl ash indicators is listed in the instruction manual for the user’s knowledge and reference.
  • Page 7 KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 Self-Diagnostic Screen Display For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confi rmed, it is possible to bring up past occurrences of failure on the screen for confi rmation.

  • Page 8: Disassembly

    KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 SECTION 1: DISASSEMBLY 1-1. REAR COVER REMOVAL * Screws (+BVTP 4x16) * Screws(+BVTP 4x16) * (+BVTP 4 x 16) Screw Legend: KV-32FV27 = 14 Screws Total KV-36FV27 = 16 Screws Total KV-36FS13/ 36FS17 / 38FS17= 15 Screws Total...

  • Page 9: 1-4. Picture Tube Removal

    KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 1-4. PICTURE TUBE REMOVAL WARNING: BEFORE REMOVING THE ANODE CAP High voltage remains in the CRT even after the power is disconnected. To avoid electric shock, discharge CRT before attempting to remove the anode cap. Short between anode and CRT Coated coated earth ground strap.

  • Page 10: Set-Up Adjustments

    KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 SECTION 2: SET-UP ADJUSTMENTS The following adjustments should be made when a complete Perform the adjustments in order as follows: realignment is required or a new picture tube is installed. Beam Landing...

  • Page 11: Convergence

    KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 2-2. CONVERGENGE OPERATION OF BMC (HEXAPOLE) MAGNET Preparation: The respective dot positions resulting from moving each magnet interact, • Perform FOCUS, V. LIN and V. SIZE adjustments. so perform adjustment while tracking.

  • Page 12: Tlh Plate Adjustment

    KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 DYNAMIC CONVERGENCE ADJUSTMENT TLH PLATE ADJUSTMENT Before starting, perform Vertical and Horizontal Static Convergence Preparation: Adjustment. • Input crosshatch pattern. • Adjust Picture Quality to standard, Picture and Brightness to 50%, 1. Slightly loosen defl ection yoke screw.

  • Page 13: 2-3. Focus

    KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 2-3. FOCUS 2-5. WHITE BALANCE ADJUSTMENTS 1. Input monoscope signal. Disp. Item All Models 2. Set user controls to normal. 3. Set video mode to STANDARD. RDRV Red Drive GDRV Green Drive 4.

  • Page 14: Safety Related Adjustments

    7. Read the digital voltmeter indication (standard = 27.24 +0.0 / -0.1 less than 136.5 VDC. VDC) (KV-32FV27 ONLY), (standard = 27.24 ± 0.1 VDC) (ALL 5. If step 4 is not satisfi ed, replace the R661 on G Board and repeat EXCEPT KV-32FV27).

  • Page 15: Circuit Adjustments

    KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 SECTION 4: CIRCUIT ADJUSTMENTS ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER Use the Remote Commander (RM-Y180, RM-Y181, RM-Y182) to perform the circuit adjustments in this section. Test Equipment Required: 1. Pattern generator 2. Frequency counter 3. Digital multimeter 4. Audio oscillator 4-2.

  • Page 16: Adjustment Items

    4-4. ADJUSTMENT ITEMS (1 OF 6) KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 Description Data Adj/Fix Initial 32" 36"/38" Comments Register Name Range Data HPOS H-Position 0-63 0: 2ms delay, 63: 2ms advance HSIZ H-Size 0-63 EW DC bias, 0: -0.5V, 31: 0V, 63: +0.5V...
  • Page 17 ADJUSTMENT ITEMS (2 OF 6) KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 Description Data Adj/Fix Initial 32" 36"/38" Comments Register Name Range Data YSPF Sharpness fo for YUV Input 0=2.5MHZ, 1=3.0MHz AXNT 0: Japan Axis, 1: US Axis...
  • Page 18 ADJUSTMENT ITEMS (3 OF 6) KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 Description Data Adj/Fix Initial 32" 36"/38" Comments Register Name Range Data ST0S Select ST0 Pin Output Signal External Y-ADC clamp pulse Noise Detection Coring 1LSB coring for noise detection circuit...
  • Page 19 ADJUSTMENT ITEMS (4 OF 6) KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 Description Data Adj/Fix Initial 32" 36"38" Comments Register Name Range Data GCUR Controls Curve of Gamma Correction 0: -2.4dB, -1.6dB BLKC Black Conpensation PIC IMP TEST...
  • Page 20 ADJUSTMENT ITEMS (5 OF 6) KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 Description Data Adj/Fix Initial 32" 36"/38" Comments Register Name Range Data PUGA Peak Level U Output 0-255 0: 0.3Vpp, 192: 1.0Vpp, 255: 1.2Vpp 4PUG Peak Level U Output YUV Input 0-255 0: 0.3Vpp, 192: 1.0Vpp, 255: 1.2Vpp...

  • Page 21: 4-5. Feature Id Map

    ADJUSTMENT ITEMS (6 OF 6) KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 Description Data Adj/Fix Initial 32" 36"/38" Comments Register Name Range Data RDOF Red Drive offset for WARM 0-63 Red Drive MOVIE=RDRV(RDR4)-RDOF GDOF Green Drive offset for WARM...

  • Page 22: 4-7. A Board Adjustments

    4. Set RDRV with 1 and 4 . 3. Select VSIZ with 1 and 4 . 5. Adjust with 3 and 6 for: 1.85 ± 0.05 Vp-p (KV-32FV27 ONLY), 4. Adjust with 3 and 6 for the best vertical size.
  • Page 23 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 H. SIZE ADJUSTMENT (HSIZ) V ANGLE (VANG), V BOW (VBOW), UPPER PIN (UPIN) AND LOW PIN (LPIN) 1. Input a monoscope signal. ADJUSTMENTS 2. Set to Service Adjustment Mode. 3. Select HSIZ with 1 and 4 .
  • Page 24 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 ROTATION COIL ADJUSTMENT 1. Input a monoscope signal. 2. Push the Menu button on the Remote. 3. Select the “Set-up” mode. 4. Select “Tilt Correction”. Confi rm that number (0) color changes to red.

  • Page 25: Diagrams

    KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 SECTION 5: DIAGRAMS 5-1. CIRCUIT BOARDS LOCATION KV-32FV27/36FV27 ONLY HX Board KV-36FS13/36FS17/38FS17 ONLY HX Board C Board WA Board C Board WA Board HA Board HB Board G Board AK Board...
  • Page 26 5-3. DIAGRAMS KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 BLOCK DIAGRAM (1 OF 6) (KV-36FS13 / 36FS17/ 38FS17 ONLY) CN262 DVD R-Y DVD B-Y AV SWITCH DVD Y DVD Y IC261 J231 S TERMINAL BLOCK 3P A BOARD VIDEO1...
  • Page 27 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 BLOCK DIAGRAM (2 OF 6) (KV-36FS13 / 36FS17 / 38FS17 ONLY) CN270 CN1641 DVD R-Y DVD B-Y DVD Y I-MENU CN1232 TO G MENU KEY CN1233 TUNING-MICON BOARD S2007-S2008 FRONT-R TO UY...
  • Page 28 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 BLOCK DIAGRAM (3 OF 6) (KV-36FS13 / 36FS17 / 38FS17 ONLY) (PIP) FROM A PROTECT BOARD DRIVER FROM CN641 2 0F 2 Q623 5V REG Q648 PWR ON (KV-36FS17 ONLY) IC3302...
  • Page 29 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 BLOCK DIAGRAM (4 OF 6) (KV-32FV27 / 36FV27 ONLY) CN262 DVD R-Y DVD B-Y DVD Y DVD Y J231 AV SWITCH IC261 S TERMINAL BLOCK 3P BUFF VIDEO1 SSW1 Q1201,5,7 Q1202...
  • Page 30 BLOCK DIAGRAM (5 OF 6) (KV-32FV27 / 36FV27 ONLY) KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 CN270 DVD R-Y CN1641 DVD B-Y DVD Y I-MENU CN1232 TO G MENU KEY CN1234 TUNING-MICON BOARD S2007-S2010 FRONT-R IC001 TO UX FRONT C...
  • Page 31 KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 BLOCK DIAGRAM (6 OF 6) (KV-32FV27 / 36FV27 ONLY) FROM A PROTECT BOARD DRIVER FROM CN641 (PIP) Q623 Q648 PWR ON 5V REG T605 CN1641 CN641 IC3302 R607 T601&T602 CN602 +B RECT...
  • Page 32 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 A BOARD SCHEMATIC DIAGRAM CN1233 TO HA BOARD CN1234 TO HS BOARD CN1233 CN270 CN271 CN1231 CN1002 CN1001 CN351 CN302 TO AK BOARD :BTOB-P :BTOB-P JW1464 TO UX BOARD — :S-MICRO...
  • Page 33 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 (*) A BOARD VARIANT MODEL LIST REF. NO. LOCATION KV-32FV27 KV-36FS17/38FS17 C1501 250V B-11 D005 MTZJ-T-77-5.6C D006 B-11 P6KE6.8A R541 G-17 6.8K 3W 2.2K 3W R560 I-18 6.8K 3W 2.2K 3W...
  • Page 34 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 A BOARD IC VOLTAGE LIST IC001 TU102 volt volt 30.3 IC501 volt -3.5 IC355 volt -13.8 IC353 IC002 volt volt 13.6 14.0 IC561 volt 14.0 -11.9 -13.8 IC003 14.4 volt IC1001...
  • Page 35 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 A BOARD IC BLOCK DIAGRAMS A BOARD: IC355 CXA2131CS EYUV CLAMP <FSC SW> ABL FIL YUV SW <YSEL> YUVOUT ABL IN <YUVOUT> DEMOD. C VCO <HUE> ABL/PEAK LIM DPIC CLAMP <ABL MODE>...
  • Page 36 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 [MICON, Y/C/J, TUNER, PIN-MOD, V. DEF, H. DEF] A BOARD LOCATOR LIST DIODE IC352 D-10 D001 IC353 C-10 D002 IC354 C-10 D003 IC355 D005 IC501 D006 IC561 D012 IC1001 — D013...
  • Page 37 AK BOARD SCHEMATIC DIAGRAM KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 LIGHTNING FASTON CN1468 IC1902 5.6V TO G BOARD Q106 CN1467 CN646 SIRCS I/O R113 STBY 5V C1907 C1906 BUFFER :CHIP C1908 :S-MICRO 4.9V R119 R118 Q105 D104 :CHIP 0.7V...
  • Page 38 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 (*) AK BOARD VARIANT MODEL LIST REF. NO. LOCATION KV-36FS13 KV-36FS17/ 38FS17 KV-32FV27 / 36FV27 C101 1µF 1µF C102 0.0022µF 0.0022µF C104 10µF 10µF C106 47µF 25V 47µF 25V C108 1000µF 25V 1000µF 25V...
  • Page 39 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 (*) AK BOARD VARIANT MODEL LIST (CONT.) REF. NO. LOCATION KV-36FS13 KV-36FS17/ 38FS17 KV-32FV27 R103 R104 R112 2.2K 2.2K R113 100K 100K R114 R115 R116 R117 4.7K 4.7K R118 R119 R440...
  • Page 40 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 [AUDIO AMP, AUDIO CONTROL/SRS, 2ND TUNER] — — — — — AK BOARD LOCATOR LIST DIODE D109 D1468 IC1403 Q105 Q1463 D101 D1461 D1469 IC1461 Q106 Q1464 D103 D1463 IC1902 Q451...

  • Page 41: C Board Schematic Diagram

    KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 C BOARD SCHEMATIC DIAGRAM R1788 L1790 :LHL08 D1795 JW(15.0MM) C1794 R1796 CN1765 — J1761 250V C1799 TO A BOARD 0.0047 G4 HV T503(FBT) KR G1 R1797 100k 32V: 34RSN 1/2W 35V: 37RSN TO A BOARD —...
  • Page 42 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 [RGB DRIVE, CRT DRIVE] — — — — — — — 42 —...
  • Page 43 KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 G BOARD SCHEMATIC DIAGRAM CN646 D641 CN642 TO AK BOARD D4SBS4F AUDIO-RECT CN1468 :S-MICRO AU+B TO AK BOARD CN645 C603 T605 CN1643 C641 0.001 1-433-408- 2200 250V C615 TO A BOARD C616 FB641 0.039...
  • Page 44 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 [POWER SUPPLY] — — — — G BOARD LOCATOR LIST DIODE D608 D626 D648 IC641 Q645 D600 D612 D627 D651 IC643 Q646 D601 D613 D628 D652 IC650 Q647 D602 D614 D629...
  • Page 45 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 HA BOARD SCHEMATIC DIAGRAM (KV-32FV27/36FV27 ONLY) CN1234 (FRONT A/V) (MENU KEY) TO A BOARD CN1233 FRONT — VIDEO2 VIDEO 2 PIN JACL(L TYPE) C1239 J1231 JW1234 (7.5MM) :CHIP FRONT S-VIDEO INPUT FRONT Y —...
  • Page 46 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 HB BOARD SCHEMATIC DIAGRAM (KV-32FV27/36FV27 ONLY) CN2001 — IC2001 WHT-L SBX3071-71 :S-MICRO IR DETECT TO A BOARD 5.0V CN1001 SIRCS R2003 47 :CHIP — STBY 5V R2001 D2002 C2001 C2002 LNJ801LPDJA :CHIP 0.01...
  • Page 47 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 [FRONT A/V, MENU KEY, IR DETECTOR] — HS BOARD SCHEMATIC DIAGRAM (KV-36FS13/36FS17/38FS17) — (FRONT A/V) CN1233 (MENU KEY) (IR DETECTOR) FRONT TO A BOARD VIDEO2 CN1233 PIN JACL(L TYPE) VIDEO2 —...
  • Page 48 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 HX BOARD SCHEMATIC DIAGRAM (KEY) — CN2002 WHT-L :S-MICRO — TO A BOARD R2014 CN1002 :CHIP POWER ON R2013 R2012 R2011 R2010 — 4.7k 1.8k :CHIP :CHIP :CHIP :CHIP S2006 POWER...
  • Page 49 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 T BOARD SCHEMATIC DIAGRAM C426 0.01 B:CHIP R439 D408 D404-411 R402 2.7k DAL5815 :CHIP (INFRARED EMITTER) :CHIP 1.2V (IR HEADPHONES) Q410 D409 2SB709A DAL5815 — D404 BUFFER IC401 R426 DAL5815 0.6V...
  • Page 50 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 UX (MAIN) BOARD SCHEMATIC DIAGRAM (KV-32FV27 / 36FV27 ONLY) CN263 CN261 :BTOB-S OFF-PAGE CONNECTOR TO A MOUNT :S-MICRO TO UX PIP BOARD TO AK MOUNT CN272 CN1467 — R2015 J231 C231...
  • Page 51 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 UX (MAIN) BOARD IC VOLTAGE LIST IC261 volt IC2005 volt IC2006 volt IC2009 volt IC1051 volt All voltages are in V IC2004 volt IC2003 volt UX (MAIN) BOARD WAVEFORMS 0.9 Vp-p (H) 0.8 Vp-p (H)
  • Page 52 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 UX (PIP) BOARD SCHEMATIC DIAGRAM (KV-32FV27 / 36FV27 ONLY) C3322 C3321 CH:CHIP CH:CHIP — IC3303 SDA9588XB23 PIP PROCESSOR X3302 R3346 20.25MHz Q3317 0.2V CVBS1 :CHIP 2SD601A MAIN HP BUFFER YREFH R3316 0.7V...

  • Page 53: Ux Board

    KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 UX (PIP) BOARD IC VOLTAGE LIST IC3302 volt IC3310 volt IC3303 IC3308 volt volt All voltages are in V UX (PIP) BOARD WAVEFORMS 6.5 Vp-p (H) 2.0 Vp-p (H) 4.5 Vp-p (V) 3.6 Vp-p (V)
  • Page 54 KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 [AV SW, 3D LINE COMB FILTER, PIP] (KV-32FV27 / 36FV27 ONLY) Component Side — — — — — — — — — 54 —...
  • Page 55 KV-32FV27 / 36FS13 / 36FS17 / 36FV27/ 38FS17 [AV SW, 3D LINE COMB FILTER, PIP] Conductor Side (KV-32FV27 / 36FV27 ONLY) — — — — — — — — — 55 —...
  • Page 56 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 UY (MAIN) BOARD SCHEMATIC DIAGRAM (KV-36FS13 / 36FS17 / 38FS17 ONLY) CN263 CN261 :BTOB-S OFF-PAGE CONNECTOR :S-MICRO TO A MOUNT TO UY PIP BOARD TO AK MOUNT CN272 CN1467 — J231...
  • Page 57 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 UY (MAIN) BOARD WAVEFORMS 1.0 Vp-p (H) 2.0 Vp-p (H) 1.0 Vp-p (H) 1.0 Vp-p (H) 2.2 Vp-p (H) 2.0 Vp-p (H) 2.0 Vp-p (H) 1.0 Vp-p (H) 1.7 Vp-p (H) (*) UY (MAIN) BOARD VARIANT MODEL LIST REF.
  • Page 58 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 UY (PIP) BOARD SCHEMATIC DIAGRAM (KV-36FS17 / 38FS17 ONLY) C3322 C3321 CH:CHIP CH:CHIP IC3303 SDA9588XB23 — PIP PROCESSOR X3302 Q3317 0.2V 2SD601A CVBS1 MAIN HP BUFFER R3346 R3316 YREFH :CHIP 0.7V...
  • Page 59 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 (*) UY (PIP) BOARD VARIANT MODEL LIST (KV-36FS17 / 38FS17 ONLY) REF. NO. LOCATION KV-36FS13 KV-36FS17/38FS17 REF. NO. LOCATION KV-36FS13 KV-36FS17/38FS17 C3301 47µF 25V L3301 10µH C3302 .01µF L3302 D-12 18µH C3303 2.2µF...

  • Page 60: Uy Board

    KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 (KV-36FS17 / 38FS17 ONLY) UY (PIP) BOARD IC VOLTAGE LIST IC3302 volt IC3310 volt IC3303 IC3308 volt volt All voltages are in V UY BOARD (COMPONENT) LOCATOR LIST DIODE Q2005 D201...
  • Page 61 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 [3D LINE COMB FILTER, AV SW, PIP] (KV-36FS13 / 36FS17 / 38FS17 ONLY) Component Side — — — — — — — — — 61 —...
  • Page 62 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 [3D LINE COMB FILTER, AV SW, PIP] (KV-36FS13 / 36FS17 / 38FS17 ONLY) Conductor Side — — — — — — — — — 62 —...

  • Page 63: Wa Board

    KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 WA BOARD SCHEMATIC DIAGRAM CN941 :S-MICRO R955 R949 8.6V TO A BOARD R943 R961 2.2k R950 :CHIP Q968 :CHIP CN1941 2SD601A :CHIP :CHIP :CHIP L944 C1941 BUFFER VM OUT JW(5mm) R956 R957 8.3V...
  • Page 64 KV-32FV27 / 36FS13 / 36FS17 / 36FV27 / 38FS17 [VELOCITY MODULATOR, QUAD POLE ROTATE] — — — — 64 —...

  • Page 65: 5-4. Semiconductors

    KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 5-4. SEMICONDUCTORS D1NL20U-TA2 PR1004GT D1NS4-TA2 MTZJ-T-77-6.8B D10SC4M 2SC4159-E 2SC3209LK-TP EL1Z-V1 D120R-TA 2SB734-T-34 ERA22-08TP3 ERA38-06TP1 ERC06-15S ERA82-004TP5 CATHODE ERD29-08J MTZJ-T-77-10B CATHODE EZ0150AV1 MTZJ-T-77-15 ERB44-06TP1 MTZJ-T-77-39 MTZJ-77-22B MTZJ-T-77-11B 1N4003GA MTZJ-T-77-15B ANODE ER204 MTZJ-T-77-24B ANODE MTZJ-T-9110...

  • Page 66: Exploded Views

    KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 SECTION 6: EXPLODED VIEWS Components not identifi ed by a part number or The component parts of an assembly are indicated by Items marked with an asterisk are not stocked since description are not stocked because they are seldom the reference numbers in the far right column of the parts they are seldom required for routine service.

  • Page 67: Chassis (Kv-32Fv27/36Fv27 Only)

    KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 NOTE: The components identifi ed by shading and ! mark are critical for safety. NOTE: Les composants identifi es par un trame et une marque ! sont critiques pour Replace only with part number specifi ed.

  • Page 68: 6-3. Picture Tube Removal

    KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 NOTE: The components identifi ed by shading and ! mark are critical for safety. NOTE: Les composants identifi es par un trame et une marque ! sont critiques pour Replace only with part number specifi ed.

  • Page 69: Electrical Parts List

    KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 SECTION 7: ELECTRICAL PARTS LIST NOTE: The components identifi ed by shading RESISTORS The components in this manual identifi ed by the following and ! mark are critical for safety. Replace only symbol: X indicate parts that have been carefully factory- •...
  • Page 70 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 NOTE: Les composants identifi es par un trame et une NOTE: The components identifi ed by shading marque ! sont critiques pour la securite. Ne les and ! mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi...
  • Page 71 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 NOTE: Les composants identifi es par un trame et une NOTE: The components identifi ed by shading marque ! sont critiques pour la securite. Ne les and ! mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi...
  • Page 72 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 NOTE: Les composants identifi es par un trame et une NOTE: The components identifi ed by shading marque ! sont critiques pour la securite. Ne les and ! mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi...
  • Page 73 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES R067 1-216-057-00 RES-CHIP 2.2K 1/10W R011 1-216-065-91 RES-CHIP 4.7K 1/10W R068 1-249-429-11 CARBON 1/4W R012 1-216-033-00 RES-CHIP 1/10W R069 1-249-429-11 CARBON 1/4W R013...
  • Page 74 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 A component identifi ed by this X symbol indicates that it NOTE: The components identifi ed by shading has been carefully factory-selected to satisfy regulations and ! mark are critical for safety. Replace only regarding X-ray radiation.
  • Page 75 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 NOTE: Les composants identifi es par un trame et une NOTE: The components identifi ed by shading marque ! sont critiques pour la securite. Ne les and ! mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi...
  • Page 76 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 A AK NOTE: Les composants identifi es par un trame et une NOTE: The components identifi ed by shading marque ! sont critiques pour la securite. Ne les and ! mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi...
  • Page 77 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 NOTE: Les composants identifi es par un trame et une NOTE: The components identifi ed by shading marque ! sont critiques pour la securite. Ne les and ! mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi...
  • Page 78 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES Q1461 8-729-422-27 TRANSISTOR 2SD601A-QRS-TX R1406 1-216-121-11 RES-CHIP 1/10W (ALL EXCEPT KV-36FS13) R1407 1-216-073-00 RES-CHIP 1/10W Q1462 8-729-422-27 TRANSISTOR 2SD601A-QRS-TX R1408 1-216-295-11 SHORT (ALL EXCEPT KV-36FS13)
  • Page 79 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 AK C G NOTE: Les composants identifi es par un trame et une NOTE: The components identifi ed by shading marque ! sont critiques pour la securite. Ne les and ! mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi...
  • Page 80 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 NOTE: Les composants identifi es par un trame et une NOTE: The components identifi ed by shading marque ! sont critiques pour la securite. Ne les and ! mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi...
  • Page 81 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 NOTE: Les composants identifi es par un trame et une NOTE: The components identifi ed by shading marque ! sont critiques pour la securite. Ne les and ! mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi...
  • Page 82 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 NOTE: Les composants identifi es par un trame et une NOTE: The components identifi ed by shading marque ! sont critiques pour la securite. Ne les and ! mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi...
  • Page 83 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 HX T REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES JACK C404 1-163-135-00 CERAMIC CHIP 560pF C405 1-104-664-11 ELECT 47µF J1231 1-691-110-11 JACK, PIN 3P C406 1-163-021-91 CERAMIC CHIP 0.01µF C407...
  • Page 84 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 T UX REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES TRANSISTOR R435 1-216-001-00 RES-CHIP 1/10W Q401 8-729-266-83 TRANSISTOR 2SC2668-YTP R436 1-216-001-00 RES-CHIP 1/10W Q402 8-729-266-83 TRANSISTOR 2SC2668-YTP R437 1-216-001-00 RES-CHIP 1/10W...
  • Page 85 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES C1205 1-126-933-11 ELECT 100µF C2037 1-104-664-11 ELECT 47µF C1207 1-126-963-11 ELECT 4.7µF C2038 1-165-319-11 CERAMIC CHIP 0.1µF C1208 1-126-963-11 ELECT 4.7µF C1209 1-163-259-91...
  • Page 86 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 NOTE: Les composants identifi es par un trame et une NOTE: The components identifi ed by shading marque ! sont critiques pour la securite. Ne les and ! mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi...
  • Page 87 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES JACK TRANSISTOR J231 1-750-515-11 TERMINAL BLOCK, S 3P Q201 8-729-422-27 TRANSISTOR 2SD601A-QRS-TX J232 1-750-517-11 JACK BLOCK, PIN 3P Q202 8-729-422-27 TRANSISTOR 2SD601A-QRS-TX J233...
  • Page 88 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES Q2014 8-729-422-27 TRANSISTOR 2SD601A-QRS-TX R234 1-216-022-00 RES-CHIP 1/10W Q2015 8-729-422-27 TRANSISTOR 2SD601A-QRS-TX R235 1-216-113-00 RES-CHIP 470K 1/10W Q2016 8-729-422-27 TRANSISTOR 2SD601A-QRS-TX R236 1-216-113-00...
  • Page 89 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES R286 1-216-067-00 RES-CHIP 5.6K 1/10W R1227 1-216-073-00 RES-CHIP 1/10W R287 1-216-025-11 RES-CHIP 1/10W R1228 1-208-774-11 METAL CHIP 0.50% 1/10W R288 1-216-067-00 RES-CHIP 5.6K...
  • Page 90 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES R2001 1-216-073-00 RES-CHIP 1/10W R2057 1-216-049-11 RES-CHIP 1/10W R2058 1-216-057-00 RES-CHIP 2.2K 1/10W R2002 1-216-073-00 RES-CHIP 1/10W R2003 1-216-085-00 RES-CHIP 1/10W R2059 1-216-049-11...
  • Page 91 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 NOTE: Les composants identifi es par un trame et une NOTE: The components identifi ed by shading marque ! sont critiques pour la securite. Ne les and ! mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi...
  • Page 92 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES C3308 1-163-038-11 CERAMIC CHIP 0.1µF C3371 1-163-031-11 CERAMIC CHIP 0.01µF (KV-36FS17/38FS17 ONLY) (KV-36FS17/38FS17 ONLY) C3309 1-126-964-11 ELECT 10µF C3556 1-163-038-11 CERAMIC CHIP 0.1µF...
  • Page 93 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 NOTE: Les composants identifi es par un trame et une NOTE: The components identifi ed by shading marque ! sont critiques pour la securite. Ne les and ! mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi...
  • Page 94 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES Q262 8-729-216-22 TRANSISTOR 2SB709A-QRS-TX R216 1-216-025-11 RES-CHIP 1/10W Q263 8-729-216-22 TRANSISTOR 2SB709A-QRS-TX (KV-36FS17/38FS17 ONLY) Q264 8-729-216-22 TRANSISTOR 2SB709A-QRS-TX R218 1-208-774-11 METAL CHIP 0.50% 1/10W...
  • Page 95 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES R1239 1-208-774-11 METAL CHIP 0.50% 1/10W R270 1-216-049-11 RES-CHIP 1/10W R1261 1-216-025-11 RES-CHIP 1/10W R271 1-216-067-00 RES-CHIP 5.6K 1/10W R1263 1-216-295-11 SHORT R272...
  • Page 96 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES R2037 1-208-784-11 METAL CHIP 1.2K 0.50% 1/10W R3343 1-216-049-11 RES-CHIP 1/10W R2038 1-208-762-11 METAL CHIP 0.50% 1/10W (KV-36FS17/38FS17 ONLY) R2039 1-216-047-91 RES-CHIP 1/10W...
  • Page 97 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 NOTE: Les composants identifi es par un trame et une NOTE: The components identifi ed by shading marque ! sont critiques pour la securite. Ne les and ! mark are critical for safety. Replace only remplacer que par une piece portant le numero specifi...
  • Page 98 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES Q946 8-729-045-05 TRANSISTOR 2SA2005 R970 1-208-822-11 METAL CHIP 0.50% 1/10W Q947 8-729-045-04 TRANSISTOR 2SC5511 (KV-32FV27 ONLY) Q948 8-719-914-43 DIODE DAN202K-T-146 R970 1-208-820-11 METAL CHIP 0.50% 1/10W...
  • Page 99 KV-32FV27 / 36FS13 /36FS17 / 36FV27/ 38FS17 REF.NO. PART NO. DESCRIPTION VALUES REF.NO. PART NO. DESCRIPTION VALUES R1959 1-216-073-00 RES-CHIP 1/10W R2971 1-208-826-11 METAL CHIP 0.50% 1/10W R1960 1-216-037-00 RES-CHIP 1/10W (ALL EXCEPT KV-32FV27) R1961 1-208-824-11 METAL CHIP 0.50% 1/10W...

  • Page 100: Operating Instructions

    4-081-776-21 Operating Instructions KV-36FS13 KV-36FS17...
  • Page 101 TV. Refer to them This television receiver provides display of television closed whenever you call upon your Sony dealer regarding this product. captioning in accordance with §15.119 of the FCC rules. About this Manual Note on Cleaning the TV This manual is for models KV-36FS13 and KV-36FS17.

  • Page 102: Important Safeguards

    Important Safeguards Cleaning For your protection, please read these instructions completely, and keep this manual for future reference. Unplug the set from the wall outlet before Carefully observe and comply with all warnings, cautions and cleaning or polishing it. Do not use liquid instructions placed on the set or described in the operating cleaners or aerosol cleaners.
  • Page 103 Power-Cord Protection Service Do not allow anything to rest on or roll over the Damage Requiring Service power cord, and do not place the set where the power cord is subject to wear or abuse. Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions: Antennas ❑...
  • Page 104 Contents Introducing the FD Trinitron Wega Using the Features Overview..............1 Overview..............29 Presenting the FD Trinitron Wega......2 Using Favorite Channels ........30 Package Contents ..........3 Using Picture in Picture (PIP) (KV-36FS17 only) ........31 Using the Remote Control ........3 Using the Menus Installing the TV Overview..............35 Overview..............9 Using the Video Menu ........36...

  • Page 105: Introducing The Fd Trinitron Wega

    Introducing the FD Trinitron Wega Overview This chapter defines the contents of your Wega TV and provides an overview of how to set up and use basic features. Topic Page Presenting the FD Trinitron Wega Package Contents Using the Remote Control...

  • Page 106: Presenting The Fd Trinitron Wega

    Introducing the FD Trinitron Wega Presenting the FD Trinitron Wega The FD Trinitron Wega (pronounced VAY-GAH) is characterized by outstanding contrast, uncompromising accuracy, and corner-to- corner detail. You will recognize the superiority of Wega technology almost immediately. The first thing you will probably notice is minimal glare from the flat picture tube.

  • Page 107: Package Contents

    Introducing the FD Trinitron Wega Package Contents Along with your new Trinitron TV, the packing box contains a remote control and two AA batteries. These items are all you need to set it up and operate the TV in its basic configuration. Most peripherals come with the necessary cables to connect them.

  • Page 108: Button Descriptions

    Mutes the sound. Press again or press VOL + to restore the sound. 2 SYSTEM OFF Powers off all Sony equipment at once. (This feature may not work with older Sony equipment.) 3 TV/VCR Switch between TV and VCR mode. If you have a non-Sony VCR, you will need to program the remote control to recognize your VCR.
  • Page 109 Introducing the FD Trinitron Wega Button Description qs FUNCTION buttons Select the equipment (TV, VCR/DVD, SAT/CABLE) (WHITE) that you want to operate. The indicator lights up momentarily when pressed to show which device the remote control is operating. qd TV/VIDEO Cycles through the video equipment connected to your TV’s video inputs.
  • Page 110 1 MUTING Mutes the sound. Press again or press VOL + to restore the sound. 2 SYSTEM OFF Powers off all Sony equipment at once. (This feature may not work with older Sony equipment.) 3 TV/VCR CONTROLS and PIP CONTROLS AUDIO Alternates sound between the main picture and the window picture.
  • Page 111 Introducing the FD Trinitron Wega Button Description qa POWER buttons Turn on and off the TV and other audio/video (GREEN) equipment. qs FUNCTION buttons Select the equipment (TV, VCR/DVD, SAT/CABLE) (WHITE) that you want to operate. The indicator lights up momentarily when pressed to show which device the remote control is operating.

  • Page 112: Installing The Tv

    Installing the TV Overview This chapter includes illustrated instructions for setting up your TV. Topic Page TV Controls and Connectors Basic Connections (Connecting a Cable or Antenna) Connecting a VCR and Cable Connecting a VCR and Cable Box (KV-36FS17 only) Connecting Two VCRs for Tape Editing Connecting a Satellite Receiver Connecting a Satellite Receiver with a VCR...

  • Page 113: Tv Controls And Connectors

    Installing the TV TV Controls and Connectors Front Panel Menu The front panel menu controls allow access to the on-screen menus Controls without the use of a remote control. Pressing the button brings MENU up the on-screen menus. The arrow buttons (Vv) move the on-screen cursor in the menus and the ( ) button selects the menu item.
  • Page 114 Installing the TV Back Panel Descriptions Connection Description 1AUX Allows you to view local and cable channels if your cable (KV-36FS17) provider does not feature local channels. You can switch between local and cable channels easily by pressing ANT on the remote control. Devices connected to the AUX input cannot be viewed in PIP.

  • Page 115: Basic Connections (Connecting A Cable Or Antenna)

    Installing the TV Basic Connections (Connecting a Cable or Antenna) Connecting Directly The connection you choose depends on the cable found in your to Cable or an home. Antenna Newer homes usually have standard coaxial cable: VHF Only or VHF/UHF or Cable VHF/UHF 75-ohm coaxial...

  • Page 116: Cable And Antenna

    Installing the TV Cable and Antenna If your cable provider does not feature local channels, you may find this set-up convenient. (KV-36FS17 only) CATV cable Rear of TV TO CONVERTER (No connection to TO CONVERTER) VHF/UHF Rear of TV Antenna cable To receive channels using an antenna, instead of using the CATV cable Select antenna mode by pressing the ANT button on the remote control.
  • Page 117 (Continued from the previous page) Installing the TV Connect the Cable TV cable to the TV’s VHF/UHF jack. Using a coaxial cable, connect the TV’s TO CONVERTER jack to the cable box’s IN jack. The TV’s internal converter allows you to switch between unscrambled signals coming straight into the TV and scrambled signals coming in through the cable box, eliminating the need for an external splitter.
  • Page 118 Installing the TV Cable Box only Use this hookup if: ❑ You subscribe to a cable TV system that scrambles or encodes all signals, requiring a cable box to view all channels, and ❑ You do not intend to hook up any other audio or video equipment to your TV.

  • Page 119: Connecting A Vcr And Cable

    Installing the TV Connecting a VCR and Cable Use this hookup if you subscribe to a cable TV (CATV) system that does not require a cable box. Connect the CATV cable to the VCR’s IN jack. Using a coaxial cable, connect the VCR’s OUT jack to the TV’s VHF/UHF jack.

  • Page 120: Connecting A Vcr And Cable Box (Kv-36Fs17 Only)

    Installing the TV Connecting a VCR and Cable Box (KV-36FS17 only) Use this hookup if: ❑ Your cable TV company scrambles some channels, but not all of them (pay channels vs. regular cable channels) and you therefore need to use a cable box, and ❑...
  • Page 121 ❑ Program the remote control as necessary. (By default, the remote control is set for a Sony VCR; to change to another brand see “Programming the Remote Control” on page 50.) Then use the VCR buttons on the remote control to switch VCR channels.
  • Page 122 Installing the TV To use PIP with the Cable Box ❑ Turn on the cable box and VCR. Use the remote control’s TV/VIDEO (yellow) button to set the PIP output to VIDEO 1. Change the PIP channel via the cable box. (The cable box’s tuner is used as the PIP video source;...

  • Page 123: Connecting Two Vcrs For Tape Editing

    Installing the TV Connecting Two VCRs for Tape Editing If you connect two VCR’s together, so you can record from one to the other, you may want to monitor the recording process. You can connect the recording VCR into your TV and then view what is being recorded.

  • Page 124: Connecting A Satellite Receiver

    Installing the TV Connecting a Satellite Receiver Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. Using an A/V cable, connect the satellite receiver’s Audio and Video OUT jacks to the TV’s Audio and Video IN jacks. Connect a coaxial cable from your cable or antenna to the TV’s VHF/UHF jack.

  • Page 125: Connecting A Satellite Receiver With A Vcr

    Installing the TV Connecting a Satellite Receiver with a VCR Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. Connect the CATV cable to the VCR’s VHF/UHF IN jack. Using a coaxial cable, connect the VCR’s OUT jack to the TV’s VHF/UHF jack.
  • Page 126 Installing the TV To change VCR video input ❑ See your VCR’s user’s guide for instructions. To watch satellite TV, or the VCR ❑ Use the TV/VIDEO on the remote control to select VIDEO 1. (The TV must be turned on.) To watch cable TV ❑...

  • Page 127: Connecting An Audio Receiver

    Installing the TV Connecting an Audio Receiver For improved sound quality, you may want to send the TV’s audio signals to your stereo system. The procedure below tells you how. Using audio cables, connect the TV’s Audio OUT jacks to the audio receiver’s Audio LINE IN jacks.

  • Page 128: Connecting A Dvd Player With Component Video Connectors

    Installing the TV Connecting a DVD Player with Component Video Connectors This is the preferred hookup to use if your DVD player has component video (Y, P ) jacks. Using three separate component video cables, connect the DVD player’s Y, P and P jacks to the Y, P and P...

  • Page 129: Connecting A Dvd Player With A/V Connectors

    Installing the TV Connecting a DVD Player with A/V Connectors Use this hookup if your DVD player does not have component video (Y, P ) jacks. ✍ An S VIDEO connection will give a good quality video signal, but if your DVD player has component video, that connection (described on the previous page) will give an even better video signal.

  • Page 130: Connecting A Camcorder

    Installing the TV Connecting a Camcorder For easy connection of a camcorder, the TV has front Audio and Video inputs (shown below). If you prefer, however, you can connect the camcorder to the TV’s rear Audio and Video IN jacks. Using A/V cables, connect the camcorder’s Audio and Video OUT jacks to the TV’s Audio and Video IN jacks.

  • Page 131: Setting Up The Tv Automatically

    Installing the TV Setting Up the TV Automatically After you finish connecting your TV, you need to run Auto Setup to set up your channels. The Auto Setup screen appears when you turn your TV on for the first time after installing it. If you do not want to set up the channels at this time, you can do it later by using the Auto Program feature in the Channel menu (see page 40).

  • Page 132: Using The Features

    Using the Features Overview This chapter describes how to use special features of your TV. Topic Page Using Favorite Channels Using Picture in Picture (PIP) (KV-36FS17 only)

  • Page 133: Using Favorite Channels

    Using the Features Using Favorite Channels The Favorite Channel feature lets you select programs from a list of favorite channels that you specify. To display a list of your favorite channels If you have not already done so, create a list of favorite channels. (See the Favorite Channels section of “Selecting Channel Options”...

  • Page 134: Using Picture In Picture (Pip) (Kv-36Fs17 Only)

    Using the Features Using Picture in Picture (PIP) (KV-36FS17 only) Picture in Picture (PIP) allows you to watch two channels simultaneously — one in the main window and another in a secondary (PIP) window. Displaying Picture in Picture Indicates which picture is currently receiving sound Main picture channel number in green...

  • Page 135: Pip Functions

    (Continued from the previous page) Using the Features Now use the main CH+/- buttons of your remote control to change the channel in the main window. If this does not work, check “Troubleshooting” on page 54 for potential solutions. PIP Functions Yellow-labeled Description PIP Button...
  • Page 136 Using the Features To change channels/programs in the PIP window ❑ Use the yellow PIP CH+/- button to scroll through the TV channels. ❑ Use the yellow TV/VIDEO button to cycle through your other video equipment connected to the TV, such as your VCR, DVD player or Satellite Receiver.

  • Page 137: Using The Menus

    Using the Menus Overview Opening and choosing a menu: Press MENU to display the Menu screen. Move Use the arrow buttons to move to the desired menu icon. Press TV/SAT GUIDE to select it. Select RESET MENU Use the arrow buttons to scroll up and down through the Arrow buttons features.

  • Page 138: Using The Video Menu

    Using the Menus Using the Video Menu To select the Video Menu Press MENU Use the arrow buttons to move to the Video icon press Use the arrow buttons to scroll up and down through the options. Press to select a feature. That feature’s adjustment appears.
  • Page 139 Using the Menus Option Description Color Temp Choose from three color temperatures: White Cool Select to give the white colors a blue tint. Neutral intensity Select to give the white colors a neutral tint. adjustment Warm Select to give the white colors a red tint (NTSC-Standard).

  • Page 140: Using The Audio Menu

    Using the Menus Using the Audio Menu To select the Audio Menu Press MENU Use the arrow buttons to move to the Audio icon and press Use the arrow buttons to scroll up and down through the options. Press to select an option. That option’s settings appear.
  • Page 141 Using the Menus Option Description Audio Out This option can be set only when the Speaker option is set to OFF. Easy control of volume Variable The TV’s speakers are turned off, but the adjustments volume output from your audio system can still be controlled by the TV’s remote control.

  • Page 142: Using The Channel Menu

    Using the Menus Using the Channel Menu To select the Channel Menu Press MENU Use the arrow buttons to move to the Channel icon press Use the arrow buttons to scroll up and down through the options. Press to select a feature. That feature’s options appear.
  • Page 143 Using the Menus Option Description Channel Removes and adds viewable channels. Skip/Add Use the arrow buttons to scroll through the channels until you find the channel you want to skip/add. Channels that you set to be skipped can be accessed Press to select it.

  • Page 144: Using The Parent Menu

    Using the Menus Using the Parent Menu The Parent menu allows you to set up the TV to block programs according to their content and rating levels. To select the Parent Menu Press MENU Use the arrow buttons to move to the Parent icon press Use the 0-9 buttons on the...

  • Page 145: Selecting Custom Rating Options

    Using the Menus US Models: For US models, the Custom Rating Menu includes the following options. (For Canadian models, see page 44. Selecting Custom Rating Options Option Description Movie Rating All children and General Audience. Parental Guidance suggested. PG-13 Parental Guidance for children under 13. The content ratings will Restricted viewing, parental guidance is increase depending on the level...

  • Page 146: Viewing Blocked Programs

    (Continued from the previous page) Using the Menus Canadian Models: For Canadian models, the Custom Rating Menu includes the following options. (For US models, see page 43 Selecting Custom Rating Options Option Description English Rating All children. Children 8 years and older. General programming.

  • Page 147: Using The Timer Menu

    Using the Menus Using the Timer Menu To select the Timer Menu Press MENU Use the arrow buttons to move to the Timer icon and press To set the Current Time Use the arrow buttons to select “Current Time”, then press If it is currently Daylight Savings Time, be sure to set the mode to “ON”...

  • Page 148: Using The Setup Menu

    Using the Menus Using the Setup Menu To select the Setup Menu Press MENU Use the arrow buttons to move to the Setup icon and press Use the arrow buttons to scroll through the features. Press to select a feature. (That feature’s options appear.) Use the arrow buttons to scroll through the options.
  • Page 149 Using the Menus Option Description Video Label Allows you to label the audio/video components you connected to the TV, so you can identify them when using the TV/VIDEO button. When in the Setup menu’s Video Label feature, use the arrow buttons to highlight an input to label, then press to select it.

  • Page 150: Using The Basic Menu

    Using the Menus Using the Basic Menu To select the Basic Menu Press MENU Use the arrow buttons to move to the Basic icon and press Use the arrow buttons to scroll through the features. Press to select a feature. (That feature’s options appear.) Use the arrow buttons to scroll through the options.

  • Page 151: Other Information

    Other Information Overview This chapter includes the following topics: Topic Page Programming the Remote Control Operating Other Components with Your TV Remote Control Troubleshooting Specifications Index...

  • Page 152: Programming The Remote Control

    Programming the Remote Control The remote control is preset to operate Sony-brand video equipment. If you have video equipment other than Sony brand that you want to control with the TV’s remote control, use the following procedure to program the remote control.
  • Page 153 Other Information Manufacturer’s Codes DVD Players Manufacturer Code Olympic 309, 308 Manufacturer Code VCRs Sony Optimus Manufacturer Code Hitachi Panasonic 308, 309, 306, Sony Admiral Pentax 305, 304 Magnavox (M. Ward) Philco 308, 309 Mitsubishi Aiwa 338, 344 Philips 308, 309, 310...

  • Page 154: Operating Other Components With Your Tv Remote Control

    Other Information Operating Other Components with Your TV Remote Control Operating a VCR To Do This ... Press Turn on/off VCR/DVD (green POWER button) Select VCR VCR/DVD (FUNCTION button) Change channels CH +/- N and z simultaneously. Record Play Stop Fast forward Rewind the tape X (press again to resume normal playback)

  • Page 155: Operating A Cable Box

    Other Information Operating a Cable To Do This ... Press Turn on/off SAT/CABLE (green POWER button) Select Cable Box SAT/CABLE (FUNCTION button) Select a channel 0-9 buttons, ENTER Change channels CH +/- Back to previous channel JUMP Operating a Satellite Receiver To Do This ...

  • Page 156: Troubleshooting

    No picture If your TV does not turn on, and a red light keeps flashing, your TV may (screen not lit), no sound need service. Call your local Sony Service Center. ❏ Make sure the power cord is plugged in.
  • Page 157 TV in my window picture Setup menu on page 47.) If, after reading these operating instructions, you have additional questions related to the use of your Sony television, please call our Direct Response Center at 1-800-222-SONY (7669) (U.S. residents only) or...

  • Page 158: Specifications

    Other Information Specifications All Models (General) ® Picture Tube FD Trinitron tube Antenna 75 ohm external terminal for VHF/UHF Television System NTSC, American TV Standard Channel Coverage 2-13 14-69 CATV 1-125 Power Requirements 120V, 60 Hz Number of Inputs/Outputs Video (IN) 1 Vp-p, 75 ohms unbalanced, sync negative S Video (IN) Y: 1 Vp-p, 75 ohms unbalanced, sync negative...

  • Page 159: Index

    Index 16:9 (anamorphic or widescreen) setting up 27 closed caption modes Code Set Button color temperature, adjusting Activating a PIP screen color, adjusting Adding channels to the channel list Connecting: Adjusting the picture definition Audio Receiver 24 ANT button Cable or antenna 12 Aspect ratio, 16:9 Cable box 13 Audio menu...
  • Page 160 (Continued from the previous page) Index Picture size, adjusting in PIP power cord, removing from holder Guide button presetting channels problems, troubleshooting Hookups hue, adjusting ratings, setting ratings, viewing blocked programs Rear panel controls and connections inputs, labeling remote control described 4 inserting batteries 3 Jump button...
  • Page 161 Index tape-to-tape editing tilt, correcting Time, set current 45 set daylight savings 45 Timer menu Timer setting treble, adjusting troubleshooting TV function button TV power button TV/VIDEO button connecting two, for tape editing 19 using with TV remote control 52 with cable box, connecting 17 with cable, connecting 16 with satellite receiver, connecting 21...
  • Page 162 Printed in U.S.A.
  • Page 163 4-081-775-21 Operating Instructions KV-32FV27 KV-36FV27 © 2001 by Sony Corporation...
  • Page 164 The (z) SRS (SOUND RETRIEVAL SYSTEM) is manufactured by Note on Caption Vision Sony Corporation under license from SRS Labs, Inc. It is covered by This television receiver provides display of television closed U.S. Patent No. 4,748,669. Other U.S. and foreign patents pending.
  • Page 165 Important Safeguards For your protection, please read these instructions completely, and Cleaning keep this manual for future reference. Unplug the set from the wall outlet before Carefully observe and comply with all warnings, cautions and cleaning or polishing it. Do not use liquid instructions placed on the set or described in the operating cleaners or aerosol cleaners.
  • Page 166 Power-Cord Protection Service Do not allow anything to rest on or roll over the Damage Requiring Service power cord, and do not place the set where the power cord is subject to wear or abuse. Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions: Antennas When the power cord or plug...
  • Page 167 Contents Introducing the FD Trinitron Wega Using the Features Overview..............1 Overview..............29 Presenting the FD Trinitron Wega......2 Using Favorite Channels........30 Package Contents ..........3 Using Picture in Picture (PIP) ......31 Using the Remote Control ........3 Using Wireless Headphones ......34 Installing the TV Using the Menus Overview..............7 Overview..............37...

  • Page 168: Introducing The Fd Trinitron Wega

    Introducing the FD Trinitron Wega Overview This chapter defines the contents of your Wega TV and provides an overview of how to set up and use basic features. Topic Page Presenting the FD Trinitron Wega Package Contents Using the Remote Control...

  • Page 169: Presenting The Fd Trinitron Wega

    Introducing the FD Trinitron Wega Presenting the FD Trinitron Wega The FD Trinitron Wega (pronounced VAY-GAH) is characterized by outstanding contrast, uncompromising accuracy, and corner-to- corner detail. You’ll recognize the superiority of Wega technology almost immediately. The first thing you probably will notice is minimal glare from the flat picture tube.

  • Page 170: Package Contents

    Introducing the FD Trinitron Wega Package Contents Along with your new Trinitron TV, the packing box contains a remote control, a pair of wireless headphones, and three AA batteries (two for the remote control, one for the headphones). These items are all you need to set it up and operate the TV in its basic configuration.
  • Page 171 Press to mute the sound. Press again or press VOL + to restore the sound. 2 SYSTEM OFF Powers off all Sony equipment at once. (This feature may not work with older Sony equipment.) 3 SLEEP Press repeatedly until the TV displays the time in minutes (15, 30, 45, 60, or 90) that you want the TV to remain on before shutting off automatically.
  • Page 172 “Programming the Remote Control” on page 52. Inside Panel 1 TV/VCR Switch between TV and VCR mode. If you have a non-Sony VCR, you will need to program the remote control to recognize your VCR. For details, see “Programming the Remote Control” on page 52. Rewind Record (press the blank button –...

  • Page 173: Installing The Tv

    Installing the TV Overview This chapter includes illustrated instructions for setting up your TV. Topic Page TV Controls and Connectors Basic Connections (Connecting a Cable or Antenna) Connecting a VCR and Cable Connecting a VCR and Cable Box Connecting Two VCRs for Tape Editing Connecting a Satellite Receiver Connecting a Satellite Receiver with a VCR Connecting an Audio Receiver...

  • Page 174: Tv Controls And Connectors

    Installing the TV TV Controls and Connectors Front Panel Menu The front panel menu controls allow access to the on-screen menus Controls without the use of a remote control. Pressing the button brings MENU up the on-screen menus. The arrow buttons (Vv) move the on-screen cursor in the menus and the ( ) button selects the menu item.
  • Page 175 L (MONO)/R to your TV’s audio through your stereo system. 8CONTROL S IN/OUT Allows the TV to receive (IN) and send (OUT) remote control signals (via wire) to other Sony infrared- controlled audio or video components. 9Y, P , L, R Connects to your DVD player’s or Digital Set-top box’s...

  • Page 176: Basic Connections (Connecting A Cable Or Antenna)

    Installing the TV Basic Connections (Connecting a Cable or Antenna) Connecting Directly The connection you choose depends on the cable found in your to Cable or to an home. Antenna Newer homes usually have standard coaxial cable: VHF Only or VHF/UHF or Cable VHF/UHF 75-ohm coaxial...
  • Page 177 Installing the TV Cable and Antenna If your cable provider does not feature local channels, you may find this set-up convenient. CATV cable Rear of TV TO CONVERTER (No connection to TO CONVERTER) VHF/UHF Antenna cable To receive channels using an antenna, instead of using the CATV cable Select antenna mode by pressing the ANT button on the remote control.
  • Page 178 To use the TV remote control to switch channels on the VCR Program the remote control as necessary. (By default, the reomte control is set for a Sony VCR; to change to another brand see “Programming the Remote Control” on page 52.) Then use the VCR buttons on the remote control to switch channels on the VCR.
  • Page 179 Installing the TV Cable Box only Use this hookup if: You subscribe to a cable TV system that scrambles or encodes all signals, requiring a cable box to view all channels, and You do not intend to hook up any other audio or video equipment to your TV.

  • Page 180: Connecting A Vcr And Cable

    Installing the TV Connecting a VCR and Cable Use this hookup if you subscribe to a cable TV (CATV) system that does not require a cable box. Connect the CATV cable to the VCR’s IN jack. Using a coaxial cable, connect the VCR’s OUT jack to the TV’s VHF/UHF jack.

  • Page 181: Connecting A Vcr And Cable Box

    Installing the TV Connecting a VCR and Cable Box Use this hookup if: Your cable TV company scrambles some channels, but not all of them (pay channels vs. regular cable channels) and you therefore need to use a cable box, and You want to use the PIP feature.
  • Page 182 To use the TV remote control to switch channels on the VCR Program the remote control as necessary. (By default, the remote control is set for a Sony VCR; to change to another brand see “Programming the Remote Control” on page 52.) Then use the...
  • Page 183 Installing the TV To use PIP with the Cable Box Turn on the cable box and VCR. Use the remote control’s TV/VIDEO (yellow) button to set the PIP output to VIDEO 1. Change the PIP channel via the cable box. (The cable box’s tuner is used as the PIP video source;...

  • Page 184: Connecting Two Vcrs For Tape Editing

    Installing the TV Connecting Two VCRs for Tape Editing If you connect two VCR’s together, so you can record from one to the other, you may want to monitor the recording process. You can connect the recording VCR into your TV and then view what is being recorded.

  • Page 185: Connecting A Satellite Receiver

    Installing the TV Connecting a Satellite Receiver Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. Using an A/V cable, connect the satellite receiver’s Audio and Video OUT jacks to the TV’s Audio and Video IN jacks. Connect a coaxial cable from your cable or antenna to the TV’s VHF/UHF jack.

  • Page 186: Connecting A Satellite Receiver With A Vcr

    Installing the TV Connecting a Satellite Receiver with a VCR Connect the satellite antenna cable to the satellite receiver’s SATELLITE IN jack. Connect the CATV cable to the VCR’s VHF/UHF IN jack. Using a coaxial cable, connect the VCR’s OUT jack to the TV’s VHF/UHF jack.
  • Page 187 Installing the TV To change VCR video input See your VCR’s user’s guide for instructions. To watch satellite TV, or the VCR Use the TV/VIDEO on the remote control to select VIDEO 1. To watch cable TV Use the TV/VIDEO on the remote control to select VHF/UHF.

  • Page 188: Connecting An Audio Receiver

    Installing the TV Connecting an Audio Receiver For improved sound quality, you may want to send the TV’s audio signals to your stereo system. The procedure below tells you how. Using audio cables, connect the TV’s Audio OUT jacks to the audio receiver’s Audio LINE IN jacks.

  • Page 189: Connecting A Dvd Player With Component Video Connectors

    Installing the TV Connecting a DVD Player with Component Video Connectors This is the preferred hookup to use if your DVD player has component video (Y, P ) jacks. Using three separate component video cables, connect the DVD player’s Y, P and P jacks to the Y, P and P...

  • Page 190: Connecting A Dvd Player With A/V Connectors

    Installing the TV Connecting a DVD Player with A/V Connectors Use this hookup if your DVD player does not have component video (Y, P ) jacks. An S VIDEO connection will give a good quality video signal, but if your DVD player has component video, that connection (described on the previous page) will give an even better video signal.

  • Page 191: Connecting A Camcorder

    Installing the TV Connecting a Camcorder For easy connection of a camcorder, the TV has front Audio and Video inputs (shown below). If you prefer, however, you can connect the camcorder to the TV’s rear Audio and Video IN jacks. Using A/V cables, connect the camcorder’s Audio and Video OUT jacks to the TV’s Audio and Video IN jacks.

  • Page 192: Using The Control S Feature

    To control your other Sony equipment with your TV’s remote control, use a CONTROL S cable (not supplied) to connect the equipment’s CONTROL S IN jack to the TV’s CONTROL S OUT jack.

  • Page 193: Setting Up The Tv Automatically

    Installing the TV Setting Up the TV Automatically After you finish connecting your TV, you need to run Auto Setup to set up your channels. The Auto Setup screen appears when you turn your TV on for the first time after installing it. If you do not want to set up the channels at this time, you can do it later by using the Auto Program feature in the Channel menu (see pages 42 and 42).

  • Page 194: Using The Features

    Using the Features Overview This chapter describes how to use special features of your TV. Topic Page Using Favorite Channels Using Picture in Picture (PIP) Using Wireless Headphones...

  • Page 195: Using Favorite Channels

    Using the Features Using Favorite Channels The Favorite Channel feature lets you select programs from a list of favorite channels that you specify. To display a list of your favorite channels If you have not already done so, create a list of favorite channels. (See the Favorite Channels section of “Selecting Channel Options”...

  • Page 196: Using Picture In Picture (Pip)

    Using the Features Using Picture in Picture (PIP) Picture in Picture (PIP) allows you to watch two channels simultaneously — one in the main window and another in a secondary (PIP) window. Displaying Picture in Picture Indicates which picture is currently receiving sound Main picture channel number in green...
  • Page 197 (Continued from the previous page) Using the Features Now use the main CH+/- buttons of your remote control to change the channel in the main window. If this does not work, check “Troubleshooting” on page 54 for potential solutions. PIP Functions Yellow-labeled Description PIP Button...
  • Page 198 Using the Features To change channels/programs in the PIP window Use the yellow PIP CH+/- button to scroll through the TV channels. Use the yellow TV/VIDEO button to cycle through your other video equipment connected to the TV, such as your VCR, DVD player or Satellite Receiver.

  • Page 199: Using Wireless Headphones

    Using the Features Using Wireless Headphones Wireless headphones are included and can be used only with Sony TV models KV-32FV26 and 36FV26. Installing the Battery Install the supplied size AA (R6) battery into the headphones. Open the battery compartment lid by pressing and sliding the lid as illustrated.
  • Page 200 Using the Features Using the Press icon and channel number display.) Headphones Turn on the power by placing the headphones securely onto your head. Power indicator Volume control To listen to sound only from wireless headphones Turn down the TV speaker level, or press on the remote MUTING control.
  • Page 201 Using the Features Listening to Sound To use your headphones to listen to the sound from the main or from PIP Main and window picture (when using PIP), select the audio source. Window Pictures If PIP is not already started, press to display a PIP window.

  • Page 202: Using The Menus

    Using the Menus Overview Opening and choosing a menu: Press MENU to display the Menu screen. MENU Move Use the joystick to move to the desired menu icon. Press RESET Select select it. Joystick Use the joystick to scroll up and down through the features. See the specific menu page for instructions on moving through the menu.

  • Page 203: Using The Video Menu

    Using the Menus Using the Video Menu To select the Video Menu Press MENU Use the joystick to move to the Video icon and press Use the joystick to scroll up and down through the options. Press to select a feature. That feature’s adjustment appears.
  • Page 204 Using the Menus Option Description Color Temp Choose from three color temperatures: Cool White Select to give the white colors a blue tint. intensity Neutral Select to give the white colors a neutral tint. Warm adjustment Select to give the white colors a red tint (NTSC-Standard).

  • Page 205: Using The Audio Menu

    Using the Menus Using the Audio Menu To select the Audio Menu Press MENU Use the joystick to move to the Audio icon and press Use the joystick to scroll up and down through the options. Press to select an option. That option’s settings appear.
  • Page 206 Using the Menus Option Description Audio Out This option can be set only when the Speaker option is set Easy control of to OFF. volume Variable The TV’s speakers are turned off, but the adjustments volume output from your audio system can still be controlled by the TV’s remote control.

  • Page 207: Using The Channel Menu

    Using the Menus Using the Channel Menu To select the Channel Menu Press MENU Use the joystick to move to the Channel icon press Use the joystick to scroll up and down through the options. Press to select a feature. That feature’s options appear.
  • Page 208 Using the Menus Option Description Channel Removes and adds viewable channels. Skip/Add Use the joystick to scroll through the channels until you find the channel you want to skip/add. Channels that you set to be skipped can be accessed Press to select it.

  • Page 209: Using The Parent Menu

    Using the Menus Using the Parent Menu The Parent menu allows you to set up the TV to block programs according to their content and rating levels. To select the Parent Menu Press MENU Use the joystick to move to the Parent icon and press Use the 0-9 buttons on the...
  • Page 210 Using the Menus US Models: For US models, the Custom Rating Menu includes the following Selecting Custom options. (For Canadian models, see page 46. Rating Options Option Description Movie Rating All children and General Audience. Parental Guidance suggested. PG-13 Parental Guidance for children under 13. The content ratings will Restricted viewing, parental guidance is increase depending on the level...
  • Page 211 (Continued from the previous page) Using the Menus Canadian Models: For Canadian models, the Custom Rating Menu includes the Selecting Custom following options. (For US models, see page 45 Rating Options Option Description English Rating All children. Children 8 years and older. General programming.

  • Page 212: Using The Timer Menu

    Using the Menus Using the Timer Menu To select the Timer Menu Press MENU Use the joystick to move to the Timer icon and press To set the Current Time Use the joystick to select “Current Time”, then press If it is currently Daylight Savings Time, be sure to set the mode to “ON”...

  • Page 213: Using The Setup Menu

    Using the Menus Using the Setup Menu To select the Setup Menu Press MENU Use the joystick to move to the Setup icon and press Use the joystick to scroll through the features. Press to select a feature. (That feature’s options appear.) Use the joystick to scroll through the options.
  • Page 214 Using the Menus Option Description Video Label Allows you to label the audio/video components you connected to the TV, so you can identify them when using the TV/VIDEO button. When in the Setup menu’s Video Label feature, use the joystick to highlight an input to label, then press to select it.

  • Page 215: Using The Basic Menu

    Using the Menus Using the Basic Menu To select the Basic Menu Press MENU Use the joystick to move to the Basic icon and press Use the joystick to scroll through the features. Press to select a feature. (That feature’s options appear.) Use the joystick to scroll through the options.

  • Page 216: Other Information

    Other Information Overview This chapter includes the following topics: Topic Page Programming the Remote Control Operating Other Components with Your TV Remote Control Troubleshooting Specifications Index...

  • Page 217: Programming The Remote Control

    8 mm VCR VHS VCR DVD Player If you have video equipment other than Sony brand that you want to control with the TV’s remote control, use the following procedure to program the remote control. The equipment must have infrared (IR) remote capability in order to be used with the remote control.
  • Page 218 Other Information Manufacturer’s Codes DVD Players Manufacturer Code Olympic 309, 308 Manufacturer Code VCRs Optimus Sony Manufacturer Code Hitachi Panasonic 308, 309, 306, Sony Admiral Pentax 305, 304 Magnavox (M. Ward) Philco 308, 309 Mitsubishi Aiwa 338, 344 Philips 308, 309, 310...

  • Page 219: Operating Other Components With Your Tv Remote Control

    Other Information Operating Other Components with Your TV Remote Control Operating a VCR Move the slide switch to the AV input you coded for the VCR. To Do This ... Press VCR/DVD (green POWER button) Turn on/off Select VCR VCR/DVD (FUNCTION button) Change channels CH +/- Record...
  • Page 220 Other Information Operating a Cable To Do This ... Press Turn on/off SAT/CABLE (green POWER button) SAT/CABLE (FUNCTION button) Select Cable Box Select a channel 0-9 buttons, ENTER Change channels CH +/- Back to previous channel JUMP Operating a Satellite Receiver To Do This ...

  • Page 221: Troubleshooting

    If your TV does not turn on, and a red light keeps flashing, your TV may (screen not lit), no sound need service. Call your local Sony Service Center. Make sure the power cord is plugged in. Push the power button on the front of the TV.
  • Page 222 TV in my window picture Setup menu on page 49.) If, after reading these operating instructions, you have additional questions related to the use of your Sony television, please call our Direct Response Center at 1-800-222-SONY (7669) (U.S. residents only) or...

  • Page 223: Specifications

    1 (Y, P Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative; P : 0.7 Vp-p, 75 ohms : 0.7 Vp-p, 75 ohms KV-32FV27 Supplied Accessories Remote Control RM-Y182 AA (R6) Batteries 2 supplied for remote control, 1 supplied for wireless headphones...
  • Page 224 Other Information KV-36FV27 Supplied Accessories Remote Control RM-Y182 AA (R6) Batteries 2 supplied for remote control, 1 supplied for wireless headphones Wireless Stereo Headphones MDR-IF0230 Optional Accessories AV Cable VMC-810/820/830 HG Audio Cable RKC-515HG Component Video Cable VMC-10/30 HG TV Stand SU-36FD4 Visible Screen Size 36 in (914.4 mm) picture measured diagonally...

  • Page 225: Index

    Index 16:9 (widescreen) Channel Skip/Add channels creating labels 43 setting up 27 Activating a PIP screen closed caption modes Adding channels to the channel list Code Set Button Adjusting the picture definition color temperature, adjusting Adjusting the audio color, adjusting Steady sound 40 Connecting: ANT button...
  • Page 226 (Continued from the previous page) Index Favorite Channel Parent menu setting up 42 parental control, described using 30 password Favorites button changing 44 features picture contrast, adjusting Front Panel controls picture definition, adjusting Picture in Picture (PIP), using picture, adjusting Guide button Picture Mode Picture size, adjusting in PIP...
  • Page 227 Index sharpness, adjusting Sleep timer/button sound effect (3-D), adjusting speakers turning on/off 40 using external speakers 40 specifications Steady Sound, adjusting Steady Sound, described surround sound tape-to-tape editing tilt, correcting Time, set current 47 set daylight savings 47 Timer menu Timer setting treble, adjusting troubleshooting...

  • Page 228: Schematic Diagrams

    PRINTING THE SERVICE MANUAL The PDF of this service manual is not designed to be printed from cover to cover. The pages vary in size, and must therefore be printed in sections based on page dimensions. NON-SCHEMATIC PAGES Data that does NOT INCLUDE schematic diagrams are formatted to 8.5 x 11 inches and can be printed on standard letter-size and/or A4-sized paper. SCHEMATIC DIAGRAMS The schematic diagram pages are provided in two ways, full size and tiled.
  • Page 229 ON-SCREEN SEARCH OPTION All of the text within the service manual PDF is content searchable. This means that you can enter any text, word, phrase or reference number that appears in the manual, and the PDF software will search, fi nd and move the cursor to the location where you requested text fi rst appears. This feature can be particularly useful in locating components on a specifi...

This manual is also suitable for:

Trinitron kv-36fs17Trinitron kv-36fs13Trinitron kv-36fv27Trinitron kv-38fs17Kv-36fs13hKv-36fv27h ... Show all

Table of Contents