Main Screen; Setting The Date And Time - Dimplex XLE Series Instruction Manual

Main Screen

After 30 seconds the heater will default back to the Main Screen. Here the chosen
temperature is displayed along with the mode of operation. Any use of the Advance,
Boost, Setback function will be displayed here, and pressing Enter will show engineer's
diagnostics and 7 day history screens.
When left inactive for a long period of time this display will 'sleep' and the text will
disappear. Press any button for its return.
Out All Day
Com fo rt O n
7 Day History
Energy Used
kWh
20/10/2017 0.0
21/10/2017 0.0
22/10/2017 0.0
23/10/2017 0.0
24/10/2017 0.0
25/10/2017 0.0

Setting the Date and Time

The heater incorporates a real time clock with
calendar function. The time clock has a battery
backup that will keep the clock running in the
event of a mains power outage.
To adjust the time or date follow the steps below.
Press the Menu button. Select Date/Time
by pressing the Enter button. Press
to select the correct day of the month and press
Enter to select.
Repeat this operation, until the date and time has
been set, ensuring to press Enter to select. Press
Back button to return to the Main Screen once
Set has been displayed.
18
U 1 :033 CC: 016
A L 6027
(0 X4 22)
Out A l l Day
A 2 3 3 0 0 0
B 42 2 M 0
C 19. 3 16.1
D 6 .5 R 12667
E 2 1 .0 26.0
F 19. 3 15. 9
G 2 8840 0 0
H 1 35 0 18 41
and
NOTE:
The display screen
will return to the main
screen after a period of
30 seconds of inactivity.
NOTE:
Pressing enter will show
the engineer's diagnostics
and 7 day history screens.
Ref: page 17.
Ou t A ll Day
Com for t On
M a i n M e n u
Date / Ti m e
M o d e
O pt i on s
D ate / Ti me
T H U
27/07/2 01 7
07 : 12
D ate / Ti me
Se t