Main Screen; Setting The Date And Time - Dimplex Saletto LPP050E Instruction Manual

Main Screen

After 30 seconds the heater will default back to the Main Screen. Here the current
target temperature (setpoint) is displayed along with the mode of operation. Any
use of the Advance function will be displayed here, and pressing Enter will show the
functions which are enabled.
When left inactive for a long period of time this display will 'sleep' and the text will
disappear. Press any button for its return.
Ou t A ll Day
Co mfo rt On

Setting the Date and Time

The heater incorporates a real time clock with calendar
function. The time clock has a battery backup that
will keep the clock running in the event of a mains
power outage.
To adjust the time or date follow the steps below.
Press the Menu button. Select Date/Time by pressing
the Enter button. Press
day of the month and press Enter to select.
Repeat this operation, until the date and time has
been set, ensuring to press Enter to select. Press
Back button to return to the Main Screen once Set
has been displayed.
14
E SOW
U I Rev 70
and to select the correct
NOTE
:
The display screen
will return to the main
screen after a period
of 30 seconds of
inactivity.
NOTE
:
Pressing enter will
show the functions
which are enabled,
e.g. ES and OW above.
Ref: page 19.
O ut Al l D ay
Com for t O n
M a i n M e n u
Date / Ti m e
M od e
O p t i o ns
D ate / Ti m e
TH U
27/07/2 01 7
07 : 1 2
D ate / Ti m e
Se t