Sony TRINITRON KV-VF21M40 Service Manual page 58

Switching on automatically - ON TIMER (continued)
9
Press M or m to set the source to be switched on, then press
ENTER.
The SOURCE changes as follows.
TV PROG t VCR N (video playback)
R
If you select TV PROG, press M or m to change the channel
numbers. Then press ENTER again.
10
Press M or m to select ON TIMER, then press ENTER.
11
Press M or m to set ON TIMER to ON, then press ENTER.
12
Press MENU to return to the normal screen.
The indicator on the video TV lights up.
To cancel the on-timer function
In step 11, press M or m to set ON TIMER to OFF, then press
ENTER.
The indicator on the video TV turns off.
50
Additional Operations
Searching using
the index
function
The video TV marks the tape with an
index signal at the point where each
recording begins. Use these signals as
references to find a specific recording.
This video TV can search up to 99 index
signals ahead of or behind the current
position.
1
Insert an indexed tape.
2
Press INDEX ./>
repeatedly to specify how
many index signals ahead
INDEX
or behind you want to
.
search.
To search ahead, press
INDEX >.
To search backwards, press
INDEX ..
The video TV starts searching and the index number on the TV
screen counts down to zero. Playback starts automatically from
that point.
To stop searching
Press STOP x.
EJECT
Z
PIC MODE
TAPE SPEED TIMER REC G-CODE ON/OFF
zREC INDEX
INDEX ./>
. >
X PAUSE
REW FF
PLAY
m H M
ENTER
STOP x
x STOP
MENU COUNTER RESET A/B
t
GAME
INDEX 5
SEARCH
>
Additional Operations
51