Sony TRINITRON KV-VF21M40 Service Manual page 52

Adjusting the TV (continued)
Adjusting the color system
Normally set the color system to AUTO. However, when the picture
has no color, manually select the appropriate color system for your
area.
1
Press MENU.
2
Press M or m to select , then press ENTER.
3
Make sure TV SET UP is selected, then press ENTER.
4
Press M or m to select COL SYS, then press ENTER.
5
Press M or m until the
appropriate color system
appears, then press
PLAY
H
ENTER.
ENTER
To return to the normal screen
Press MENU.
38
Additional Operations
TV SET UP 3
AUTO PROGRAM
MANUAL PROGRAM
PLAY
SKIP : PR 01 OFF
H
ENTER
TV SYS : D/K
COL SYS : PAL
INTELLIGENT VOL : OFF
SELECT ENTER
Changing the PICTURE MODE setting
The PICTURE MODE menu allows you to adjust the picture quality.
1
Press MENU.
2
Press M or m to select ,
then press ENTER.
PLAY
H
ENTER
3
Press M or m to select
ADJUST , then press
ENTER.
PLAY
H
ENTER
4
Press M or m to select the desired item, then press ENTER.
The adjustment bar for the selected item appears at the bottom of
the screen.
5
Adjust the value according to the following table, then press
ENTER.
For Press m to
PICTURE decrease picture contrast
COLOR decrease color intensity
BRIGHT darken the picture
HUE* increase red picture tones
SHARP soften the picture
*You can adjust HUE for the NTSC color system only.
To return to the normal screen
Press MENU.
PICTURE MODE 3
·
DYNAMIC
·
STANDARD
·
PLAY
SOFT
H
·
PERSONAL
ENTER
ADJUST
SELECT ENTER
PERSONAL ADJUST 3
PICTURE 80
COLOR 50
PLAY
BLIGHT 50
H
HUE 00
ENTER
SHARP 50
SELECT ENTER
Press M to
increase picture contrast
increase color intensity
brighten the picture
increase green picture tones
sharpen the picture
continued
Additional Operations
39