Sony Wega KE-P37XS1 Operating Instructions Manual page 19

Reset Press OK to reset the picture to the factory preset levels.
This option is set to Auto to automatically reduce the snowy picture visible in the weak broadcast
Noise
signal. However, it can be modified. After selecting this option press
Reduction
select High, Mid, Low or Off. Finally, press OK to store.
Colour Tone This option allows you to alter the tint of the picture. After selecting this option press
repeatedly
colours a neutral tint), Cold (gives the white colours a blue tint). Finally press OK to store.
DRC Mode This option allows you to select the high resolution picture with 4x density for high quality sources
(i.e. DVD player, satellite receiver). This option is set to High Density (recommended for moving
pictures). However it can be modified. After selecting this option, press
select Progressive (recommended for still images and text).
This option only appears and can only be adjusted if "Picture Mode" is set to "Personal".
DRC Palette This option allows you to customise the level of detail (Reality) and smoothness (Clarity) for up to
three input sources. After selecting this option press
higher as the mark
b
to adjust Clarity (as you move
smoother). Finally, press OK to store.
This option only appears and can only be adjusted if "Picture Mode" is set to "Personal".
v V
or to select: Warm (gives the white colours a red tint), Normal (gives the white
is along the Reality axis, the picture becomes more detailed) and press
b
. Next, press
to the right, along the Clarity axis, the picture becomes
b v V
. Next, press to
or
b
. Next, press
b v V
. Next press
or
v V
or , to adjust Reality (as
B
TV Functions
to
or
GB
19