Overview Of Remote Control Buttons - Sony KP-41PZ1D Instruction Manual

Getting Started - Overview

Overview of Remote Control Buttons

This button does not work on this set.
Muting the Sound
Press to mute TV sound.
Press again to restore the sound.
Press to switch your VCR on or off.
Selecting TV mode
Press to switch off Teletext or video input.
Selecting Teletext
Press to switch on Teletext.
These buttons do not work on this set.
Selecting channels
Press to select channels.
For double-digit programme numbers, e.g. 23,
press -/-- first, then the buttons 2 and 3.
If you enter an incorrect first digit, this should
be corrected by entering another digit (0-9)
and then selecting -/-- button again to enter
the programme number of your choice.
+++++++++++++++...
Selecting Sound mode
Press repeatedly to change the sound mode.
+++++++++++++++++...
Selecting Picture mode
Press repeatedly to change the picture mode.
+++++++++++++++++...
Adjusting TV Volume
Press to adjust the volume of the TV.
Besides TV functions, all coloured buttons as well as green
symbols are also used for Teletext operation. For more details,
please refer to the "Teletext" section of this instruction manual.
VCR on/off
1
4
7
VIDEO TV
VTR 1 2 3 4 DVD
CH
To Temporarily Switch Off projection
TV
Press to temporarily switch off TV (the
standby indicator
VIDEO TV up). Press again to switch on TV from
standby mode.
To save energy we recommend switching off
completely when TV is not in use.
Displaying On Screen Information
Press to display all on-screen indications.
Press again to cancel.
2 3
Selecting Input source
5 6
Press repeatedly until the desired input
symbol of the source appears on the screen.
8 9
Back to the channel last watched
0
Press to watch the last channel selected
(watched for at least 5 seconds).
Selecting Screen format
Press repeteadly to change the format of the
K screen.
This button only works in Teletext mode.
PROGR Function
work with this set.
MENU
Joystick for menu selection
4 Scroll Up
$ Scroll Down
RM 892
Z Previous menu or selection
z Next menu or selection
S
OK Confirms your selection
Selecting channels
Press to select the next or previous channel.
Displaying the menu system
Press to display the menu on the screen.
Press again to remove the menu display
from the screen.
Displaying the time
Press to switch the time on or off
(available only when teletext is
broadcast).
VCR operation
For more details, please refer to
the section "Remote Control of
other Sony Equipment"
on projection TV lights
After 15-30 minutes without a
signal and without any button being
pressed, the projection TV switches
automatically into standby mode.
associated to this button does not
Getting Started - Overview
7