Cleaning The Paper Sensors - Xerox DocuMate 4799 Manual

Scanner Options, Maintenance and Troubleshooting
1. Pull on the scanner cover release and lift the lid to open the scanner.
2. The following illustration shows the location of the glass in the scanner.
Use a soft cloth to wipe clean the glass. You can use a roller cleaning paper to clean the glass
plates if there is any sticky residue on the surface.

Cleaning the Paper Sensors

The scanner has several sensors to detect the status of the paper when it is in the scanner. You
should clean these sensors as part of your standard weekly maintenance of the scanner.
Note: Do not clean the sensors with the roller cleaning paper.
Preparation
• Turn off the scanner prior to cleaning the sensors.
• Locate the Blower Brush accessory that was provided with your scanner, this is what you will
use to clean the sensors.
User Guide
® ®
Xerox DocuMate 4799
6-9