Av3 Output; Tv Speakers; Rgb Centring - Sony FD Trinitron KV-29XL70K Operating Instructions Manual

Level 1
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
If you select "AUTO", the output signal will always be the same one that is displayed on the screen.
If you have connected a decoder to the Scart socket
socket, please remember to set the "AV3 Output" to "AUTO" or "TV" for correct unscrambling.
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Introducing and Using the Menu System
Level 2 Level 3 / Function

AV3 OUTPUT

The "AV3 Output" option in the "Detail Set Up" menu
allows you to select the source to be output from the
Scart connector
this Scart any signal coming from the TV or from
external equipment connected to Scart connectors
4 or
S
Detail Set Up
Noise Reduction: Auto
AV3 Output: TV

TV Speakers:

On
To do this:

RGB Centring:

0
Picture Rotation: 0
PIP Input: AV1
After selecting the option, press the b button. Then
PIP Position:
press the v or V buttons to select the desired output
OK
signal: TV, AV1, AV2, AV4, YC4 or AUTO.
TV SPEAKERS
The "TV Speakers" option in the "Detail Set Up"
menu allows you to mute the TV speakers in order to
listen to the TV from an external amplifier connected
to the audio outputs on the rear of the TV set.
To do this:
After selecting the option, press the b button. Then
press the v or V buttons to select Off. Finally press
the OK button to confirm and store.
Detail Set Up
Noise Reduction:
Auto
AV3 Output:
TV
To cancel this function later on, select "On" instead of
TV Speakers:
On
RGB Centring: 0
"Off" in the step above.
Picture Rotation: 0
PIP Input: AV1
PIP Position:
OK
RGB CENTRING
When connecting an RGB source, such as a
"PlayStation", you may need to readjust the
horizontal position of the picture. In that case, you
can readjust it using the "RGB Centring" option in the
"Detail Set Up".
To do this:
While watching an RGB source select the "RGB
Centring" option and press the b button. Then press
Detail Set Up
the v or V buttons to adjust the centre of the picture
Noise Reduction: Auto
AV3 Output: TV
between –10 and +10. Finally press the OK button to
TV Speakers: On
RGB Centring: 0
confirm and store.
Picture Rotation: 0
PIP Input: AV1
PIP Position:
OK
3/ 3 so you can record from
S
1/ 1 or 2/ 2 or the front connectors
4 and 4.
If your VCR supports Smartlink, this procedure
is not necessary.
3/ 3 or to a VCR connected to that Scart
S
continued...
15
Menu System
GB