Table of Contents
Advertisement
Available languages
Available languages
Level 1
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
If you select "AUTO", the output signal will always be the same one that is displayed on the screen.
If you have connected a decoder to the Scart socket
socket, please remember to set the "AV2 Output" to "AUTO" or "TV" for correct unscrambling.
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Introducing and Using the Menu System
Level 2
Level 3 / Function
NOISE REDUCTION
The "Noise Reduction" option in the "Detail Set Up"
menu allows you to automatically reduce any picture
noise visible in the broadcast signal.
To do this:
After selecting the option, press the b button. Then
press the v or V buttons to select Auto. Finally press
the OK button to confirm and store.
Detail Set Up
To cancel this function later on, select "Off" instead of
Noise Reduction:
Auto
AV2 output:
TV
"Auto" in the step above.
TV speakers:
On
RGB Centring:
0
Picture Rotation
0
OK
AV2 OUTPUT
The "AV2 Output" option in the "Detail Set Up" menu
allows you to select the source to be output from the
Scart connector
TV signal from this Scart, or signals from external
equipment connected to the Scart connector
Detail Set Up
Noise Reduction:
Auto
To do this:
AV2 output:
TV
TV speakers:
On
After selecting the option, press the b button. Then
RGB Centring:
0
Picture Rotation
0
press the v or V buttons to select the desired output
signal: TV, AV1, AV3, YC3 or AUTO.
OK
TV SPEAKERS
The "TV Speakers" option in the "Detail Set Up"
menu allows you to mute the TV speakers in order to
listen to the TV from an external amplifier connected
to the audio outputs on the rear of the TV set.
To do this:
After selecting the option, press the b button. Then
press the v or V buttons to select Off. Finally press
the OK button to confirm and store.
Detail Set Up
Noise Reduction:
Auto
To cancel this function later on, select "On" instead of
AV2 output:
TV
TV speakers:
On
"Off" in the step above.
RGB Centring:
0
Picture Rotation
0
OK
2/
2. You can then record the
1, or the side connectors
If your VCR supports Smartlink, this procedure
is not necessary.
2/
2 or to a VCR connected to that Scart
1/
3,
3 and
3.
S
continued...
15
Menu System
GB
Hide quick links:
Advertisement
Table of Contents
