Carton Contents; Body And Handle Assembly - Dirt Devil Quick & Light FD50035 Owner's Manual

CARTON CONTENTS

A. Upper Handle
B. Midsection
C. Base
D. Upholstery/Stair Hose Adapter
E. Tool Caddy
F. Upholstery/Stair Hose
G. Upholstery/Stair Attachment
H. (1) Upper Handle screw
I. (2) Right and Left Base Screws
J. (1) Middle Base Screw
K. (3) Nuts
Remove all parts from carton and identify each
item shown.
Make sure all parts are located before disposing of
packing materials.
NOTE: Phillips screwdriver needed for assembly
CAUTION
!
DO NOT USE THIS EXTRACTOR ON HARD
FLOORS. USING THIS MACHINE ON HARD
FLOORS MAY SCRATCH OR DAMAGE YOUR
FLOOR.

BODY AND HANDLE ASSEMBLY

1.2 Stand base in upright position. Push
midsection onto base by aligning tabs on the
backside of midsection and the pockets on the
backside of base. Assemble the two lower handle
screws (I) in the following manner: while holding
nuts (K) in place, insert screw through front of
midsection and tighten.
IMPORTANT
Make sure the power cord is out of the way to
avoid pinching.
1.3 Slide upper handle down onto unit. Place Upper
Handle screw (H) into recess in back of upper
handle and tighten.
1. CLEANER ASSEMBLY
!
1.1
A
D
E
H
I
I
J
1.2
1.3
H
5
B
C
F
G
K
I
I
K
K