Table of Contents
Advertisement
Operating
7.10
Charging the battery
BAT.PAR 8 RGBW
58
LED bar
You can charge the batteries while using the device. A maximum of two batteries can be
charged at the same time. Do not remove the batteries until charging is complete.
1.
Insert the batteries in the slots provided.
2.
Connect the device to the power grid.
ð Charging starts and the charge indicator flashes from left to right. When the charge
indicator lights steadily, charging is complete.
3.
You can remove the batteries when they are fully charged. Press the two push-buttons
on the side of the battery to release the battery from the slot.
During charging, the unit can be turned on and off with the main power switch.
Advertisement
Table of Contents
