Table of Contents
Advertisement
USA Only
This tool is intended for use on a circuit that has an outlet
that looks like the one illustrated in Fig. A. It has a grounding
plug that looks like the one in Fig. B. A temporary adapter,
which looks like the adapter illustrated in Fig. C & Fig. D, may
be used to connect this plug to a 2-pole receptacle as shown
in Fig. D if a properly grounded outlet is not available. The
temporary adapter should be used only until a properly
grounded outlet can be installed by a qualified electrician.
The green-colored rigid ear, lug, and the like, extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box.
Cover of Grounded
Outlet Box
Fig. A
3. Personal Safety:
Sharpening operations can create hot sparks and metal debris,
loud noises and dust.
a) Stay alert - watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment (PPE).
Always wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Use ear protection during use.
generate in excess of 85 dB(A) noise emissions when in
operation.
d) Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source and/
or battery pack, and when picking up or carrying the tool.
Carrying power tools with your finger on the switch, or
energizing power tools that have the switch on invites
accidents.
e) Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
6
Grounding Pin
Fig. B
Cover of Grounded
Outlet Box
Adapter
Metal Screw
Grounding Means
Fig. C
Drill Doctor
www.drilldoctor.com
Fig. D
®
unit can
Advertisement
Table of Contents
