Reset; Exit - Marshall Amplification CV503 User Manual

11. RESET

Select RESET using the UP or DOWN buttons.
• RESET: Reset the camera settings the factory defaults or user setting value.
MENU
WB CONTROL >
AE CONTROL >
DAY/NIGHT >
AUDIO >
IMAGE CONTROL >
SPECIAL >
SETUP >
RESET >

EXIT

• ON: Set the camera setting to either "FACTORY" or "USER" of "CHANGE" menu. Make sure
to select the right mode from "CHANGE" before defaulting the camera.
• RESET MODE: Select the desired setting mode.
Select from USER or FACTORY using the LEFT or RIGHT button.
1. USER: Select "USER" if setting value user saved last is needed.
2. FACTORY: Select "FACTORY" if factory default setting is needed.
"FRAME RATE", "CAM ID", and "BAUDRATE" will note change.
13
RESET
RESET MODE FACTORY
RESET >
SAVE AS USER
RETURN
12. EXIT
Select EXIT using the UP or DOWN button.
MENU
WB CONTROL >
AE CONTROL >
DAY/NIGHT >
AUDIO >
IMAGE CONTROL >
SPECIAL >
SETUP >
RESET >
EXIT
• SAVE: Exit the setup after saving the value changes.
www.marshall-usa.com
CV503/CV506/CV344/CV346 Manual
14