Osd Joystick And Button; Wb Control - Marshall Amplification CV503 User Manual

3. OSD Joystick and Button

2
U
4 L 1 R 5
D
3
RS485
AUDIO IN POWER
I/O Cable (included in box) for CV503, CV506, CV344, CV346
1. SET Used to access the menu and confrim selection.
2. UP Used to move the cursor up.
3. DOWN Used to move the cursor down.
4. LEFT Used to move the cursor left and change the value
5. RIGHT Used to move the cursor to the right and change the value.
Press SET button to access the Main Menu

WB CONTROL

AE CONTROL
Use the UP & DOWN
DAY/NIGHT
buttons to select the
AUDIO
desired item.
IMAGE CONTROL
SPECIAL
SETUP
RESET
EXIT
> Icon indicates "Press OSD button" or "Enter Sub Menu"
5
503 506
344 346
MENU
>
>
Use the LEFT & RIGHT
>
buttons to change the
>
sub-item.
>
>
>
>
4. WB CONTROL
Select WB CONTROL using the UP or DOWN button. You can change between AUTO, ATW, PUSH,
and MANUAL using the LEFT or RIGHT buttons.
• ATW: Continuously adjusts camera color balance in accordance with any change in color
temperature. Compensates for color temperature changes within the range of 1,900°K to
11,000°K.
• ONE PUSH: Color temperature will be manually adjusted by pushing the OSD button. Place
the white paper in front of the camera when OSD button is pressed to obtain optimum result.
• MANUAL: Select this to fine-tune White Balance manually.
You can adjust the blue and red tone level manually.
1. BLUE: Adjust the Blue tone of the image. (0~100)
2. RED: Adjust the Red tone of the image. (0~100)
• INDOOR: Select this to adjust white balance to indoor lighting condition.
• OUTDOOR: Select this to adjust white balance to outdoor lighting condition.
MENU
WB CONTROL >
AE CONTROL >
DAY/NIGHT >
AUDIO >
IMAGE CONTROL >
SPECIAL >
SETUP >
RESET >
EXIT
1. Adjust White Balance first by using the ATW mode before switching to MANUAL mode.
2. White Balance may not work properly under the following conditions. In this case, select
the ATW mode.
• When the ambient illumination of the subject is dim.
• If the camera is directed towards a fluorescent light or is installed in place where
illumination changes dramatically, the White Balance operation may become unstable.
www.marshall-usa.com
CV503/CV506/CV344/CV346 Manual
WB CONTROL
MODE MANUAL
PUSH
BLUE 50
RED 50
RETURN >
6