Audio; Image Control - Marshall Amplification CV503 User Manual

7. AUDIO

Select AUDIO using the UP or DOWN button and enter ON using SEL button. You can select one
sub-mode using the UP or DOWN buttons.
• MIC / LINE: Select MIC or LINE for the audio input source.
• AUDIO LEVEL: Select this to adjust audio levels manually.
• MIC ATTENUATOR: Audio attenuation can be controlled from this menu to minimize the
audio noise level
1. SAMPLE BITS: Select the bit depth of audio
MENU
WB CONTROL >
AE CONTROL >
DAY/NIGHT >
AUDIO >

IMAGE CONTROL

>
SPECIAL >
SETUP >
RESET >
EXIT
9
AUDIO
MODE OFF
AUDIO LEVEL 0 dB
MIC ATTENUATOR OFF
AGC LIMIT
SAMPLE BITS 24 BITS
RETURN
8. IMAGE CONTROL
Select IMAGE CONTROL using the UP or DOWN button.
You can select LENS SHADING, CONTRAST, HUE, And EDGE ENHANCE using the UP or DOWN
buttons.
MENU
WB CONTROL >
AE CONTROL >
DAY/NIGHT >
AUDIO >
IMAGE CONTROL >
SPECIAL >
SETUP >
RESET >
EXIT
• LENS SHADING: Corrects inconsistent brightness level in the image.
• CONTRAST: Adjust the image contrast level.
• BRIGHTNESS: Adjust the image brightness level.
• SATURATION: Adjust the image saturation level.
• HUE: Adjust the image hue level.
• EDGE ENHANCE: Adjust the image sharpness level.
• AUTO SATURATE: Decrease saturation automatically when noise scene is detected.
• AUTO EDGE: Adjust line sharpness level automatically.
• BLACK WHITE LEVEL: Adjust the image black level value.
• GAMMA CORRECT: Adjust the image output gamma level.
• DNR: Reduces video noise at low ambient light.
Select the DNR level from OFF, LOW, MIDDLE, and HIGH using the LEFT or RIGHT button.
www.marshall-usa.com
CV503/CV506/CV344/CV346 Manual
IMAGE CONTROL
LENS SHADING OFF
CONTRAST 11
BRIGHTNESS 11
SATURATION 10
HUE 0
EDGE ENHANCE 5
AUTO SATURATE MIDDLE
AUTO EDGE ON
BLACK WHITE LV >
GAMMA CORRECT DEFAULT
DNR >
RETURN
10