Table of Contents
Advertisement
SAFETY REGULATION
Key to symbols:
Failure to comply with this warning
implies the risk of personal injury, in some
circumstances even fatal
Failure to comply with this warning implies
the risk of damage, in some circumstances
even serious, to property, plants or animals.
Install the appliance on a solid wall which is not
subject to vibration.
Noisy operation.
When drilling holes in the wall for installation
purposes, take care not to damage any electrical
wiring or existing piping.
Electrocution caused by contact with live wires.
Explosions, fires or asphyxiation caused by gas
leaking from damaged piping.
Damage to existing installations.
Flooding caused by water leaking from damaged
piping.
Perform all electrical connections using wires
which have a suitable section.
Fire caused by overheating due to electrical
current passing through undersized cables.
Protect all connection pipes and wires in order to
prevent them from being damaged.
Electrocution caused by contact with live wires.
Explosions, fires or asphyxiation caused by gas
leaking from damaged piping.
Flooding caused by water leaking from damaged
piping.
Make sure the installation site and any systems to
which the appliance must be connected comply
with the applicable norms in force.
Electrocution caused by contact with live wires
which have been installed incorrectly.
Damage to the appliance caused by improper
operating conditions.
Use suitable manual tools and equipment (make
sure in particular that the tool is not worn out
and that its handle is fixed properly); use them
correctly and make sure they do not fall from a
height. Replace them once you have finished using
them.
Personal injury from the falling splinters or
fragments, inhalation of dust, shocks, cuts, pricks
and abrasions.
Damage to the appliance or surrounding objects
caused by falling splinters, knocks and incisions.
Use electrical equipment suitable for its intended
use (in particular, make sure that the power
supply cable and plug are intact and that the parts
featuring rotary or reciprocating motions are
fastened correctly); use this equipment correctly;
do not obstruct passageways with the power
supply cable, make sure no equipment could fall
from a height. Disconnect it and replace it safely
after use.
Personal injury caused by falling splinters or
fragments, inhalation of dust, knocks, cuts,
puncture wounds, abrasions, noise and vibration.
Damage to the appliance or surrounding objects
caused by falling splinters, knocks and incisions.
Make sure any portable ladders are positioned
securely, that they are suitably strong and that the
steps are intact and not slippery and do not wobble
when someone climbs them. Ensure someone
provides supervision at all times.
Personal injury caused by falling from a height or
cuts (stepladders shutting accidentally).
Make sure any rolling ladders are positioned
securely, that they are suitably strong, that the
steps are intact and not slippery and that the
ladders are fitted with handrails on either side of
the ladder and parapets on the landing.
Personal injury caused by falling from a height.
During all work carried out at a certain height
(generally with a difference in height of more than
two metres), make sure that parapets are used to
surround the work area or that individual harnesses
are used to prevent falls. The space where any
accidental fall may occur should be free from
dangerous obstacles, and any impact upon falling
should be cushioned by semi-rigid or deformable
surfaces.
Personal injury caused by falling from a height.
Make sure the workplace has suitable hygiene
and sanitary conditions in terms of lighting,
ventilation and solidity of the structures.
Personal injury caused by knocks, stumbling etc.
Protect the appliance and all areas in the
vicinity of the work place using suitable material.
Damage to the appliance or surrounding objects
caused by falling splinters, knocks and incisions.
Handle the appliance with suitable protection
and with care.
Damage to the appliance or surrounding objects
from shocks, knocks, incisions and squashing.
OVERVIEW
/
5
Advertisement
Table of Contents
