Samsung AM022FN1DEH/TK Service Manual page 98

Disassembly and Reassembly
No Parts
5 Stepping Motor
6 Display PCB
3-66
Procedure
1) Loosen the 4 screws in rear side of Front
Cover assembly as shown in picture.
2) Loosen the 2 screws as shown in picture.
3) Disassemble the Blade and Stepping Motor
assembly and remove the 2 Screws Stepping
Motor.
1) Loosen the 3 screws in rear side of
Front Cover assembly as shown in picture.
2) Disassemble Display PCB assembly and
Disconnect Wire.
3) Disassemble the Display PCB.
Remark
Samsung Electronics