Using The Recording Timer - Sony GigaJuke NAS-E35HD Operating Instructions Manual

Using the Recording Timer

You can set the timer to automatically turn the
unit on and off at a specified time. The unit starts
recording a radio program or a DAB service*
automatically when it turns on. Make sure the
clock (page 21), the radio station (page 32), or the
DAB service* (page 32) must be set beforehand.
* For the UK model only
1
Prepare the sound source.
Tune in the desired radio station or DAB
service.
2
Press CLOCK/TIMER SET repeatedly
until "REC SET?" appears, and then
press ENTER.
"ON" appears and the hour indication
flashes.
3
Set the time to start recording.
Press / to select the hour, and then press
 so that the minute indication flashes. Do
the same procedure to set the minute.
To go back to the hour indication, press .
When you press ENTER after setting
the minute, "OFF" appears and the hour
indication flashes.
4
Set the time to stop recording.
Do the same procedure as step 3.
5
GB
5
Press  to turn off the unit.
About 60 seconds before the preset time, the
unit will automatically turn on, and about
10 seconds before, the Recording Timer will
activate. If the unit is already on at about 60
seconds before, the Recording Timer will
not be activated.
To stop a timer recording
Press .
To continue playback after the
Recording Timer's stop time
You can cancel the Recording Timer setting while
the timer is operating. When you do this, the stop
time is cancelled and playback continues.
To cancel the setting, press CLOCK/TIMER
SELECT repeatedly to select "TIMER OFF" while
the Recording Timer operation is in progress.
To activate or check the timer again
Press CLOCK/TIMER SELECT repeatedly to
select "REC SELECT?", and then press ENTER.
To cancel the timer
Press CLOCK/TIMER SELECT repeatedly to
select "TIMER OFF", and then press ENTER.
To change the setting
Start over from step 1.
Notes
 You cannot set a stop time for the Recording Timer
that is the same time as a start time. If you do, "OFF
TIME NG!" appears.
 To listen to the sound while recording, press the
VOLUME + button so that the sound is not muted.
 If you want to record a DAB service using Recording
Timer, you should preset the service you want to
record in advance. If not, you will not be able to
make the setting.