Special Notes - Ford ESCAPE HYBRID 2008 Emergency Response Manual

SPECIAL NOTES

• If the vehicle is on fire, use a Class ABC powder-type extinguisher to
contain and smother the flames. Or, if water is used, large amounts are
required (e.g., from a fire hydrant).
• If the vehicle has any exposed cables, make sure you are wearing
insulated gloves and other protective clothing. Do not touch any broken
or damaged orange cables. Treat severed lines as if they contain high
voltage.
• If the vehicle is submerged in water, do not touch any high-voltage
components or cables while extricating the occupant(s). Do not remove
the vehicle until you are sure the high-voltage battery is completely
discharged. A submerged high-voltage battery may produce a fizzing or
bubbling reaction. The high-voltage battery will be discharged when the
fizzing or bubbling has completely stopped.
3. IF THE HIGH-VOLTAGE BATTERY CASE HAS BEEN RUPTURED
• Just like any other battery, hose the area down with large amounts of
water.
4. MOVING DAMAGED VEHICLES — WRECKER DRIVERS
• Turn the vehicle ignition key to the ACCESSORY position to release the
locking steering wheel.
• If possible, remove the high-voltage service disconnect switch by
turning it counterclockwise and lifting out. Reinstall in the
service/shipping position.
• Follow the guidelines in the Wrecker Towing Manual.
— Front Tow: Wheel Lift with Dolly for 4WD and No Dolly for FWD
— Rear Tow: Wheel Lift with Dolly for All (FWD or 4WD)
— Flat bed: Front and Rear
5. SPECIAL NOTE TO SALVAGE YARDS
• If a vehicle with a high-voltage battery is to be scrapped, the high-
voltage battery must be disposed of following all local, state/provincial
and federal guidelines.
FCS-14265-08
12