Table of Contents
Advertisement
KEEPING YOUR
WEBER GAS GRILL IN
TIP-TOP SHAPE
m DANGER
Failure to correct any problems described
on this page may result in a fire, which can
cause serious bodily injury or death, and
cause damage to property.
ANNUAL MAINTENANCE
To keep your gas grill performing as safely and efficiently
as on day one, we strongly recommend that you inspect
and clean the spider/insect screen(s) and burner tube(s)
at least once a year. Below is important information about
these two areas of the grill that should undergo annual
maintenance.
If you observe an incorrect flame pattern or blocked
burner port, proceed to the "BURNER TUBE CLEANING OR
REPLACEMENT" instructions on the following page.
BURNER FLAME PATTERN
The burner tube(s) in your gas grill was/were factory set
for the correct air and gas mixture. The correct flame
pattern is shown in illustration and described below:
•
Burner tube(s) (1)
•
Tips occasionally flicker yellow (2)
•
Light blue (3)
•
Dark blue (4)
Check burner flame pattern. If the flames do not match the
above description, it could be an indication that the spider/
insect screen(s) has/have become dirty or blocked.
WEBER SPIDER/INSECT SCREEN(S)
The combustion air opening(s) of the burner tube(s) (5) is/
are fitted with stainless steel screen(s) to help prevent
spiders and other insects from spinning webs and building
nests inside the venturi section (6) of the burner tube(s).
These nests can obstruct the normal gas flow, and can
cause gas to flow back out of the combustion air opening(s)
(7). Symptoms of this kind of obstruction include the odour
of gas in conjunction with burner flames that appear yellow
and lazy. This obstruction could result in a fire in and
around the gas valve(s), causing serious damage to your
grill (8).
NOTE: If a spider/insect screen becomes damaged or
cannot be cleaned, please contact the Customer Service
Representative in your area using the contact information on
our web site. Log onto www.weber.com.
BURNER TUBE PORTS
Over time, from repeated use of the grill, the burner tube
ports will become dirty. Blocked and dirty ports can restrict
full gas flow. Following are ways to determine whether
burner tube ports are dirty or blocked.
•
Grill does not reach desired temperature
•
Grill heats unevenly
•
One or more of the burner(s) do not ignite
1
6
5
8
WWW.WEBER.COM
2
3
4
7
15
Hide quick links:
Advertisement
Table of Contents
