Panaray 502 A Series Loudspeaker Specifications - Bose Panaray 402 Series IV Installation Manual

Technical Information
® ®
Panaray 502 A Series Loudspeaker Specifications
System Performance
(1)
Frequency Range ± (-10 dB)
Recommended High-Pass Protection Filter
Nominal Coverage Pattern
Loudspeaker EQ
Overload Protection
Power Handling, long-term continuous
Power Handling, peak
Sensitivity (SPL / 1 W @ 1 m)
Calculated Maximum SPL @ 1 m
Calculated Maximum SPL @ 1 m, peak
Transducers
Full-range Drivers
Nominal Impedance
Physical
Enclosure Material
Grille
Environmental
Connectors
Suspension / Mounting
Dimensions (H xW xD)
Net Weight
Shipping Weight
Product Code
Black
White
Notes:
1. Frequency range measured on-axis with recommended EQ in an anechoic environment.
2. Bose extended-lifecycle test: pink noise, IEC268-5 filtered, 6-dB crest factor, 100-hour duration, with recommended EQ.
3. AES component test: pink noise, IEC268-5 filtered, 6-dB crest factor, 2-hour duration, with recommended EQ.
4. Sensitivity measured in anechoic acoustic boundary conditions with recommended EQ, referenced to 1 W/m.
5. Maximum SPL calculated from sensitivity and power handling specifications, exclusive of power compression.
For additional specifications and application information, please visit pro.Bose.com. Specifications subject to change without notice.
22
Bose extended-lifecycle test
(4)
(5)
®
Panaray
103 Hz – 15 kHz
110 Hz with minimum 12 dB / octave filter
120° H x 70° V
active EQ required for optimal performance
fused: 4-ampere AGC 4 (Buss) or 3AG (Littlefuse)
(2)
150 W
600 W
Free field
88 dB
110
116
5 x Bose 4.5 (114 mm) full-range cone transducers
8 ohms
mineral-reinforced structural foam
power-coated steel grille
indoor use only
2 x Neutrik ® NL4 and 2x barrier strips, wired parallel
4 x M8 threaded inserts (4 back)
603 mm x 146 mm x 179 mm (23.8 x 5.8 x 7.1 )
6.8 kg (15 lb)
8.3 kg (18 lb)
040170
040171
502A
(3)
AES component test
200 W
800 W
Free field
88 dB
111
117
pro.Bose.com