Extended Menu; Items In The Extended Menu - Sony XDCAM PDW-1500 Operation Manual

8-3 Extended Menu

8-3-1 Items in the Extended Menu

The following tables show the items in the extended menu.
• Item names are the names which appear on an external
monitor to which the output of the VIDEO OUT 2
(SUPER)/SDI OUT 2 (SUPER) connector is input.
• An abbreviated name appears in the time data display
section when you press the NEXT button.
Item number Item name
101 SELECTION FOR SEARCH DIAL
ENABLE
105 REFERENCE SYSTEM ALARM
107 REC INHIBIT LAMP FLASHING
108 AUTO EE SELECT
109 FORCED EE WHEN DISC UNLOAD When "off" is selected in menu item 108, during disc loading/unloading
114 AUDIO MONITOR OUTPUT LEVEL
118 KEY INHIBIT
Sub-item
1 MON./INPUT SEL
2 CONTROL PANEL
119 VARIABLE SPEED LIMIT IN KEY
PANEL CONTROL
Menu items in the 100s, relating to the control panels
Settings
Select how the unit enters the shuttle, jog, or variable speed mode.
dial (dial direct): Press the SHUTTLE, JOG or VAR button or, except
during recording/editing, turn the jog dial or shuttle dial.
key (via search key): Press the SHUTTLE, JOG or VAR button.
Select whether or not to display a warning when the reference video
signal is not supplied or is out of phase with the input video signal.
off: No warning.
on: Flash the STOP button as a warning.
Select whether or not to flash the REC INH indicator when recording is
prevented (see "REC INH (recording inhibit) indicator" on page 24).
off: Light the REC INH indicator.
on: Flash the REC INH indicator.
When a disc is inserted, select the operation modes in which input video
and audio signals are automatically handled in E-E mode.
S/F/R (stop/f.fwd/f.rev): In stop/fast-forward/fast-reverse modes
stop: In stop mode
off: Do not put the unit into E-E mode automatically.
and when no disc is inserted, select whether or not to control the output
signal PB/EE setting.
on: Do not control (the signal is always an E-E signal).
off: Control.
Select whether or not to control the level of the audio signal output from
the AUDIO MONITOR OUT connector with the volume control knob for
the PHONES jack.
var (variable): Control.
fixed: Do not control.
Select which buttons can be operated. The following sub-items control
different sets of buttons independently.
Select whether the AUDIO MONITOR SEL, the AUDIO METER SEL, the
AUDIO INPUT CH, and the VIDEO INPUT SEL buttons are enabled.
on: Disabled.
off: Enabled.
Select whether all switches and buttons other than the buttons specified
with sub-item 1 and the MENU button are enabled.
on: Disabled.
off: Enabled.
Select the playback speed range when carrying out playback in variable
speed mode from the control panel of this unit.
off (off (–2 to +2)): –2 to +2 times normal speed.
on (on ( 0 to +1)): 0 to +1 times normal speed.
• The values in the Settings columns are the values which
appear in the time data display section. (The values may
appear in a different format on an external monitor. In
this case, the external monitor values are shown in
parentheses.) Underlined values are the factory defaults.
109
8-3 Extended Menu