Sony SCD-XB790 Operating Instructions Manual page 6

Hooking Up the Audio Components
Connecting via ANALOG 5.1CH OUT jacks
Use audio connecting cords for this connection. Connect the
ANALOG 5.1CH OUT jacks (FRONT L/R, SURR L/R, CENTER,
SUBWOOFER) to the corresponding jacks of your amplifier. For
FRONT or SURR connection, use the connecting cords (Red and
White jacks) (one audio cord is supplied with the player) and be
sure to match the colour-coded pin to the appropriate jacks:
white (left) to white and red (right) to red. For CENTER and SUB
WOOFER connection, use the connecting cords (Black) (not
supplied).
FRONT or SURR connection
Audio connecting cords (Red and White) (one audio cord is
supplied with the player)
White (L)
Red (R)
ANALOG
2CH OUT 5.1CH OUT
FRONT SURR
L
L
R
R
To FRONT IN
jacks (L/R)
6 GB
White (L)
Red (R)
DIGITAL(CD)
OUT
CENTER COAXIAL OPTICAL
SUB
WOOFER
To SURROUND or
To SUB WOOFER
REAR IN jacks
IN jack
(L/R)
CENTER or SUB WOOFER connection
Audio connecting cords (Black) (not supplied)
Black
Notes
• When you make the Multi-channel connection, connect the
ANALOG 2CH OUT jacks also using another audio connecting
cord so that you can play a CD (or Super Audio CD) when you
set the input selector of your amplifier to CD (or Super Audio
CD) input .
• During playback of a conventional CD or a 2CH Super Audio
CD, the same signal that is output from the ANALOG 2CH
OUT jacks is also output from the ANALOG 5.1CH FRONT L/
R jacks.
• During playback of a Multi-channel Super Audio CD, the same
signal that is output from the ANALOG 5.1CH FRONT L/R
jacks is also output from the ANALOG 2CH OUT jacks. (The
down mixed signal of the Multi-channel signal is not played
back.)
• There are 5CH, 4CH, and 3CH Super Audio CD. When you
play these disc, the signal does not output from all the jacks of
the ANALOG 5.1CH OUT. For details of the playback, see the
cover or instructions of the Super Audio CD.
To CENTER IN
jack
Black
Multi-channel amplifier,
AV amplifier, etc.