1. Manuals
  2. Brands
  3. Horizon Fitness Manuals
  4. Binding Machine
  5. QC-S300
  6. Manual

Horizon Fitness QC-S300 Manual

Table top collator
Hide thumbs Also See for QC-S300:
Table of Contents

Advertisement

Quick Links

Download this manual
QC-S30/S300 Revision Control List
Manual No.
Date
US501041-00
Mar/1/2006
US501041-01
Dec/14/2007
Bulletin Code
S/N applied
5703051_00
021001-
5703051_01
(S300)
CD070122_00
014001-
CD070122_01
(S30)
History
First Edition
1.Changing Pad Pressure Adjusting Lever.
2.Adding Tension Pulley.
Page
2-10,3-2
3-3

Advertisement

Table of Contents
loading

Related Manuals for Horizon Fitness QC-S300

Summary of Contents for Horizon Fitness QC-S300

  • Page 1 QC-S30/S300 Revision Control List Manual No. Date Bulletin Code S/N applied History Page US501041-00 Mar/1/2006 First Edition 5703051_00 1.Changing Pad Pressure Adjusting Lever. 2-10,3-2 US501041-01 Dec/14/2007 021001- 5703051_01 (S300) CD070122_00 2.Adding Tension Pulley. 014001- CD070122_01 (S30)
  • Page 3 Important Information This service manual is designed to help you to repair and maintain the QC-S300/QC-S30 in order to keep it in good oper- ating condition. Please read and understand the instructions in this service manual before performing any repair or main- tenance.
  • Page 4 Safety Precautions - Please read and understand all safety instructions with include the terms , and . If these WARNING CAUTION safety instructions are ignored, personal injury may result. - The repair, maintenance and safety instructions in this manual are valid only when the repair or maintenance work is per- formed according to the procedures described in this manual.
  • Page 5 Abbreviations 1. Abbreviations for wire colors 3. Other Abbreviations = Brown BLU = Blue = Connector R/VR = Volume = Red VIO = Violet = Dip Switch SL/SOL = Solenoid = Orange GRY = Gray = Noise Filter SSR = Solid State Relay = Yellow WHT = White = Green...
  • Page 6 Handling Precautions for P.C.Board and ROM P.C.Board and ROM can be damaged by humanly imperceptible static electricity. Handle P.C.Board with following care. Do not put P.C.Board and Keep P.C.Board in a Acrylic ROM on the machine, shield bag. Cover especially on the acrylic cover. (No problem on the conductive plate.) And keep the P.C.Board and...

  • Page 7: Table Of Contents

    ................1-4 2-3-2 Offset Function Malfunction ............. 2-12 1-3-1 Description of the Service Screen ............. 1-4 2-3-3 Bin Does not Rise (Lower) on QC-S300 .......... 2-13 1-3-2 Initial Setting Screen................1-5 2-3-4 Gate Does not Switch ..............2-14 1-3-3 Service Mode Screen-P1..............1-6 2-3-5 Machine Does not Stop although the Tray is Full ......
  • Page 8 6-3 Wiring Diagram on Each Section (QC-S300) ......6-4 4-3-1 Other Electrical Parts Location and Name......... 4-4 6-3-1 Wiring Diagram on Each Section (QC-S300) ........6-4 6-3-2 24VDC Wiring Diagram (QC-S300/S300F) ........6-5 6-4 Wiring Diagram on Each Section (QC-S30) ......6-6 5.

  • Page 9: General

    1 General 1- 2 1-1 Model of the Collator and Configuration ..........1- 3 1-2 Delivery Mechanism ................1-3 Service Screen (1/6) ................1- 4 1- 10 1-4 Setting the QC-S30 ................1- 12 1-5 Transferring the Image Data ..............1- 13 1-6 Resetting the Connecting Order ............

  • Page 10: Model Of The Collator And Configuration

    1 - 1 - 1 Table for Model of the collator and Configuration 1 General 1 - 1 Model of the Collator and Configuration Table for Model of the collator and Configuration 1 - 1 - Model QC-S300 QC-S30 QC-S300F QC-S30F Items Color LCD and Touch Panel...

  • Page 11: Delivery Mechanism

    1 General turned 1 - 2 Delivery Mechanism Delivery Mechanism 1 - 2 - Order of the delivered sheets differs Delivered face of the sheets differs Connected Collators: Overlap amount is between left delivery and the right delivery. between left delivery and the right delivery. setup at the left tower.

  • Page 12: Service Screen

    1 - 3 - 1 Description of the Service Screen 1 General Q C - S 3 0 0 1 - 3 Service Screen (1/6) Description of the Service Screen 1 - 3 - Information Screen Refer to [1 - 3 - 3] (Page 1-6) - Overlap amount to the right delivery.

  • Page 13: Initial Setting Screen

    1 General 1 - 3 Service Screen Q C - S 3 0 0 (2/6) Initial Setting Screen 1 - 3 - Initial Setting Screen Frequency Select the frequency of the area where the col- lators is used. Select [On] when SPF (Stitcher) is used. SPF-9 Series 51041...

  • Page 14: Service Mode Screen-P1

    1 - 3 - 3 Service Mode Screen-P1 1 General Q C - S 3 0 0 1 - 3 Service Screen (3/6) Service Mode Screen-P1 1 - 3 - When deliver to the right (Single) Gap becomes opposite - If the value is increased, gap between the P1 Service Mode Screen sheets becomes bigger.(*) - If the value is decreased, gap between the...

  • Page 15: Service Mode Screen-P2

    1 General 1 - 3 Service Screen Q C - S 3 0 0 (4/6) Service Mode Screen-P2 1 - 3 - When deliver to the right P2 Service Mode Screen (Several Towers) - If the value is increased, gap between the sheets becomes bigger.(*) - If the value is decreased, gap between the -direction...

  • Page 16: Service Mode Screen-P3

    51041 1 2 3 4 5 6 7 8 10305B1 Collating speed can be limited by using this button. QC-S300 is operated by the maximum speed depending on the sheet size or a number of sheets used. Speed Limit When using thin sheets which are easy to break, trouble may occur frequently with the maximum speed.

  • Page 17: Service Mode Screen-P4

    1 General 1 - 3 Service Screen Q C - S 3 0 0 (6/6) Service Mode Screen-P4 1 - 3 - Input Monitror Screen Single Operation Screen P4 Service Mode Screen = Light Condition When door is closed. When offset sensor is not blocked.

  • Page 18: Setting The Qc-S30

    1-10 1 - 4 - 1 Setting the Frequency/SPF/Connecting Order 1 General Q C - S 3 0 0 1 - 4 Setting the QC-S30 Setting the Frequency/SPF/Connecting Order 1 - 4 - Setting the Connecting Order Change the frequency setting. Display •...

  • Page 19: Setting The Overlap Amount

    1 General Q C - S 3 0 0 1 - 4 Setting the QC-S30 Setting the Overlap Amount 1 - 4 - Turn on the power switch while pressing the [Stop] button and the [Finisher / Stacker Select] button together. Display shows the following figures. Press the button for one's place (rightmost button), and the value increases.

  • Page 20: Transferring The Image Data

    - Screen Switching Program QPM-208 • Connect the board and the PC using the serial cable • Screen data on QC-S300 can be updated by trans- and the adapter. ferring the new data from your PC. This section explains how to update the screen data.

  • Page 21: Resetting The Connecting Order

    1 General Q C - S 3 0 0 1 - 6 Resetting the Connecting Order Resetting the Connecting Order (Tower No.) 1 - 6 - Resetting the Connecting Order Connecting Order and DSW Setting • Connecting order can be set on the Initial Setting screen.
  • Page 22 1-14 1 General This page is intentionally left blank.

  • Page 23: Troubleshooting

    2 Troubleshooting 2-0 Problem Recovery ................2- 2 2-1 Error is Indicated on the Panel (1/6) ..........2- 3 2-2 Problem in Collating Quality (1/2) ............. 2- 9 2-3 Problem in Machine Operation (1/5) ..........2-11 2-4 Problem in LCD Monitor ..............2-16 Troubleshooting...

  • Page 24: Problem Recovery 2

    2 - 0 - 1 Problem Recovery List 2 Troubleshooting 2 - 0 Problem Recovery Problem Recovery List 2 - 0 - Category of Trouble Trouble Reference Misfeed or Double Feed Error is Indicated To [2 - 1 - 1] Jam or No Sheet Error is Indicated To [2 - 1 - 2] Tray Full Error is Indicated.

  • Page 25: Error Is Indicated On The Panel

    2 Troubleshooting 2 - 1 Error is Indicated on the Panel (1/6) Misfeed or Double Feed Error is Indicated 2 - 1 - Icon/ Error Model Causes and Recovery Screen [Cause] Sheet pass sensor (B11 through B20) has been turned on longer than the set time. Or the amount of light received is less than the set amount.

  • Page 26: Jam Or No Sheet Error Is Indicated

    2 - 1 - 2 Jam or No Sheet Error is Indicated 2 Troubleshooting 2 - 1 Error is Indicated on the Panel (2/6) Jam or No Sheet Error is Indicated 2 - 1 - Icon/ Error Model Causes and Recovery Screen [Cause] Sheet feeding time detection is over 40.

  • Page 27: Tray Full Error Is Indicated

    2 Troubleshooting 2 - 1 Error is Indicated on the Panel (3/6) Tray Full Error is Indicated 2 - 1 - Icon/ Error Model Causes and Recovery Screen Single [Cause] When tray full detect sensor B03R (Photoelectric Sensor) remains on for three seconds. (On = when blocked) Towers Several [Cause] When tray full detect sensor B03R remains on for 1.5 seconds.

  • Page 28: Door Open Error Is Indicated

    2 - 1 - 4 Door Open Error is Indicated 2 Troubleshooting 2 - 1 Error is Indicated on the Panel (4/6) Door Open Error is Indicated 2 - 1 - Icon/ Error Model Causes and Recovery Screen [Cause] When the door open/close sensor B01 (Magnetic Switch) turns off. (On = When the magnetic approach) [Recovery] If the door open error appears and the machine stops although the door is closed completely, (1) Push the upper right part of the closed door.

  • Page 29: Option Error Or Communication Error Is Indicated

    [Recovery] If option error appears and the machine stops although optional error did not occur. S300 (1) Check the wiring and connection between optional device and the extension connector (X13) on QC-S300. (2) Check the wiring and connection between extension connector (X13) and CON7, pin 17, pin 1 through 5 on QPW-725.

  • Page 30: Bin Up/Down Error Is Indicated

    2 - 1 - 6 Bin Up/Down Error is Indicated 2 Troubleshooting 2 - 1 Error is Indicated on the Panel (6/6) Bin Up/Down Error is Indicated 2 - 1 - Icon/ Error Model Causes and Recovery Screen [Cause] - There is a problem on bin upper limit switch (S05) or bin lower limit switch (S06). [Additional Information] - When the power is turned on, bin up/down motor (M04) rotates to raise the bins.

  • Page 31: Problem In Collating Quality

    2 Troubleshooting 2 - 2 Problem in Collating Quality (1/2) Offset is not Performed Correctly 2 - 2 - Sheets or Machine Are Set Correctly Backstop Angle is Correct Receiving Tray Stops at Correct Position - If the sheets or machine setting is not set correctly, - Angle of the backstop can be adjusted.

  • Page 32: Sheets Are Scratched Or Stained

    2-10 2 - 2 - 2 Sheets are Scratched or Stained 2 Troubleshooting 2 - 2 Problem in Collating Quality (2/2) Sheets are Scratched or Stained 2 - 2 - Roller or Belt is Stained Friction Pad Pressure is Too Strong Top of the Sheets are Scratched - If the delivered sheets has a stain on the center as - If the friction pad pressure is too strong, back of the...

  • Page 33: Problem In Machine Operation

    2 Troubleshooting 2 - 3 Problem in Machine Operation (1/5) Machine Does not Start 2 - 3 - Screen is All Black (S300) Feed Roller Does Not Rotate - If the monitor is all white, ........- If the monitor is all black, ........Check the LEDs on control board QPW-725.

  • Page 34: Offset Function Malfunction

    51041 VDC is not measured, check the followings. 20302A1 - [For QC-S300] Check the wiring and connection between MO3 and CON3, pin 5 and 6 on QPW-725. - [For QC-S30] Check the wiring and connection between MO3 and CON9, pin 5 and 6 on QPW-748.

  • Page 35: Bin Does Not Rise (Lower) On Qc-S300

    (4) Connecting link and the shaft are correctly tight- ure above. ened. (5) Bin link F is not at the upper position. 2-13 1-13 2 - 3 - 3 Bin Does not Rise (Lower) on QC-S300 Troubleshooting...

  • Page 36: Gate Does Not Switch

    Operation] and Y01/Y02 solenoid is turned On/Off, QC-S30 QC-S30 Plunger of the solenoid tries to move ･････････････ QPW-748 Plunger of the solenoid does not try to move ･･････ QC-S300 QC-S300 Main Control Board QPW-725 Gate Open/Close CON9 Plunger of Y01 Tries to Move...

  • Page 37: Machine Does Not Stop Although The Tray Is Full

    - Measure the voltage of the connector (power source Light side). If 5VDC is measured, it is correct. - [For QC-S300] If 5VDC is not measured, check the wiring and connection between B03L and CON5, pin 12 and 13 on QPW-725.

  • Page 38: Problem In Lcd Monitor

    2-16 2 - 4 - 1 Trouble in LCD Monitor 2 Troubleshooting Q C - S 3 0 0 2 - 4 Problem in LCD Monitor Trouble in LCD Monitor 2 - 4 - Check the followings. Monitor is All Black Monitor is All White or has Stripe Pattern - Main circuit protector Q00 is not tripped.

  • Page 39: Mechanism Of Qc-S300/-S30

    3 Mechanism of QC-S300/-S30 3-1 Feed Section ..................3-2 Drive Link Section ................3-3 Transport Belt Frame Section............. 3-4 Gate Switch Section ................3-5 Bin Up Section (1/2) 3-6 Offset/Swing Section ................3- 8 3-7 Conveyor Section ................Mechanism of QC-S300/-S30...

  • Page 40: Feed Section

    3 - 1 - 1 Feed Section Mechanism 3 Mechanism of QC-S300/-S30 3 - 1 Feed Section Feed Section Mechanism 3 - 1 - S300 Double Feed Preventing Section Explanation Sheet Pass Sensor B11 to B20 (from top) - When the sheet transported by...

  • Page 41: Drive Link Section

    3 Mechanism of QC-S300/-S30 3 - 2 Drive Link Section Drive Link Section Mechanism 3 - 2 - Tension Pulley Feed Section Cross View S/N:021001-(S300) Clutch S/N:014001-(S30) Seeing Bin1 from the Rear Clutch Gear Feed Roller Feed Roller Power Transmission Gear...

  • Page 42: Transport Belt Frame Section

    3 - 3 - 1 Transport Belt Frame Section Mechanism 3 Mechanism of QC-S300/-S30 3 - 3 Transport Belt Frame Section Transport Belt Frame Section Mechanism 3 - 3 - Upper Part of Belt Frame Tension the transport belt here.

  • Page 43: Gate Switch Section

    3 Mechanism of QC-S300/-S30 3 - 4 Gate Switch Section Gate Switch Section Mechanism 3 - 4 - Delivered to the Right Delivered to the Left Gate Plate Gate Drive Link Solenoid Screw T h i s s c r e w p u l l s t h e...

  • Page 44: Bin Up Section (1/2)

    3 - 5 - 1 Bin Up Mechanism of QC-S300 3 Mechanism of QC-S300/-S30 Q C - S 3 0 0 3 - 5 Bin Up Section (1/2) Bin Up Mechanism of QC-S300 3 - 5 - Gate Plate SW...

  • Page 45: Bin Up Mechanism Of Qc-S30

    3 Mechanism of QC-S300/-S30 3 - 5 Bin Up Section Q C - S 3 0 (2/2) Bin Up Mechanism of QC-S30 3 - 5 - When lever is raised When lever is lowered Bin Up/Down Lever Bin Up/ Down...

  • Page 46: Offset/Swing Section

    3 - 6 - 1 Offset/Swing Section Mechanism 3 Mechanism of QC-S300/-S30 3 - 6 Offset/Swing Section Offset/Swing Section Mechanism 3 - 6 - Drive Section Drive Section Cross View Off-set Motor Off-set Sensor Sensor Cam Ball Plunger Crank Lever...

  • Page 47: Conveyor Section

    3 Mechanism of QC-S300/-S30 3 - 7 Conveyor Section Conveyor Section Mechanism 3 - 7 - Cross View Cross View Conveyor (Upper) Conveyor Belt Solenoid Conveyor Motor Conveyor (Middle) YO2 is ON Gate Section Gate Section Gate Solenoid Conveyor (Lower)
  • Page 48 3-10 3 Mechanism of QC-S300/-S30 This page is intentionally left blank.

  • Page 49: Electrical Parts Location

    4 Electrical Parts Location 4-1 Motor/Solenoid Location and Name 4-2 Sensor/Solenoid Location and Name ..........4-3 Other Electrical Parts Location and Name ......... Electrical Parts Location...

  • Page 50: Motor/Solenoid Location And Name

    4 - 1 - 1 Motor/Solenoid Location and Name 4 Electrical Parts Location 4 - 1 Motor/Solenoid Location and Name Motor/Solenoid Location and Name 4 - 1 - QC-S300 QC-S300 Seen from Front Seen from Front Gate Solenoid Conveyor Motor...

  • Page 51: Sensor/Solenoid Location And Name

    4 Electrical Parts Location 4 - 2 Sensor/Solenoid Location and Name Sensor/Solenoid Location and Name 4 - 2 - Seen from Front Seen from Front Seen from Door Side Bin Upper Limit Door Open/Close Sensor B03 L Full Detect (Projector) 51041 40201B1 Bin Lower...

  • Page 52: Other Electrical Parts Location And Name

    4 - 3 - 1 Other Electrical Parts Location and Name 4 Electrical Parts Location 4 - 3 Other Electrical Parts Location and Name Other Electrical Parts Location and Name 4 - 3 - (Only for QC-S300F) Condensor 51041 40301A1 Main Transport Bin Up Motor Relay...
  • Page 53 5-1 Board Location and Name ..............5- 2 5-2 QPM-208:Color LCD Control Board (QC-S300) (1/2)......5- 3 5-3 QPW-725: Main Control Board (QC-S300) (1/3) ....... 5- 5 5-4 QPW-726: Switch Board (QC-S300) ..........5- 8 5-5 QPW-749: User Interface Board (QC-S30) ..........

  • Page 54: Board Location And Name

    5 - 1 - 1 Board Location and Name 5 Board 5 - 1 Board Location and Name Board Location and Name 5 - 1 - Q C - S 3 0 0 / S 3 0 0 F Q C - S 3 0 / S 3 0 F Color LCD QPM208 QPM208...

  • Page 55: Qpm-208:Color Lcd Control Board (Qc-S300)

    Touch Panel Touch Panel TDX0 10 9 QPW723 QPW723 CON3 CON10 RDX0 3 GND CON1 QPW-725 QPW-725 Main Control Board Main Control Board Flat Cable for Touch Panel 51041 50201A1 5 - 2 - 1 QPM-208 Connector Location (QC-S300) Board...

  • Page 56: Dsw And Led On Qpm-208

    5 - 2 - 2 DSW and LED on QPM-208 5 Board Q C - S 3 0 0 5 - 2 QPM-208: Color LCD Control Board (QC-S300) (2/2) DSW and LED on QPM-208 5 - 2 - Switching Power Supply...

  • Page 57: Qpw-725: Main Control Board (Qc-S300)

    5 Board 5 - 3 QPW-725: Main Control Board (QC-S300) Q C - S 3 0 0 (1/3) QPW-725 Connector Location (Upper Half) 5 - 3 - To QPM208 CON4 1.RED 3.BRN BL Terminal 4.ORN CON10 +24V CON5 TXD0 or 1...

  • Page 58: Connector Location (Lower Half)

    5 - 3 - 1 QPW-725 Connector Location (Lower Half) 5 Board Q C - S 3 0 0 5 - 3 QPW-725: Main Control Board (QC-S300) (2/3) QPW-725 Connector Location (Lower Half) 5 - 3 - CON6 QPW-725 QPW-725...

  • Page 59: Dsw And Led On Qpw-725

    5 Board 5 - 3 QPW-725: Main Control Board (QC-S300) Q C - S 3 0 0 (3/3) DSW and LED on QPW-725 5 - 3 - CON6 CON1 Sheet Pass Sensor Receiving Light Adjustment Adjust the sheet pass sensor light receiving amount while there are LED No.

  • Page 60: Connector Location (Qc-S300)

    5 - 4 - 1 QPW-726 Connector Location (QC-S300) 5 Board Q C - S 3 0 0 5 - 4 QPW-726: Switch Board (QC-S300) QPW-726 Connector Location (QC-S300) 5 - 4 - QPW-726: Switch Board QPW-726: Switch Board Stop Button...

  • Page 61: Qpw-749: User Interface Board (Qc-S30)

    5 Board 5 - 5 QPW-749: User Interface Board (QC-S30) Q C - S 3 0 QPW-749 Connector Location (QC-S30) 5 - 5 - LED18 LED19 LED20 LED21 LA-401MN LA-401MN LA-401MN LA-401MN B3W-1152 B3W-1152 B3W-1152 B3W-1152 LED1 CON3 QPW-749 QPW-749 LED2 User Interface Board User Interface Board...

  • Page 62: Connector Location (Qc-S30)

    5-10 5 - 6 - 1 QPW-748 Connector Location (QC-S30) 5 Board Q C - S 3 0 5 - 6 QPW-748: Main Control Board (QC-S30) (1/2) QPW-748 Connector Location (QC-S30) 5 - 6 - BL Terminal QPW-748 QPW-748 +24V Control Board CON5 Bin Up...

  • Page 63: Led On Qpw-748

    5 Board 5 - 6 QPW-748: Main Control Board (QC-S30) Q C - S 3 0 (2/2) LED on QPW-748 5 - 6 - LED No. Condition to Light LED 1 1 QPW-749 SW1 SW1 : When 4th disit is ON 40Pin Flat Cable LED 2 2 QPW-749 SW2...

  • Page 64: Qpw-726: Switch Board (Qc-S30)

    5-12 5 - 7 - 1 QPW-726 Connector Location (QC-S30) 5 Board Q C - S 3 0 5 - 7 QPW-726: Switch Board (QC-S30) QPW-726 Connector Location (QC-S30) 5 - 7 - QPW-726: Switch Board QPW-726: Switch Board Stop Button Start Button B3W-4155 B3W-4155...

  • Page 65: Wiring Diagram

    6 Wiring Diagram 6-1 Power Circuit Diagram (QC-S300/S300F,-S30/S30F)......6-2 Drive Section 115/230 VAC Wiring Diagram (QC-S300/S30)..... 6-3 Wiring Diagram on Each Section (QC-S300) (1/2)......6-4 Wiring Diagram on Each Section (QC-S30) (1/2)....... 6- 7 Wiring Diagram...

  • Page 66: Power Circuit Diagram (Qc-S300/S300F,-S30/S30F)

    6 - 1 - 1 Power Circuit Diagram (QC-S300/S300F,-S30/S30F) 6 Wiring Diagram 6 - 1 Power Circuit Diagram (QC-S300/S300F,-S30/S30F) Power Circuit Diagram (QC-S300/S300F,-S30/S30F) 6 - 1 - Power Supply Relay AC115V/230V Spark Killer 50/60HZ BL-08V Main Switch Main Motor BL-08V...

  • Page 67: Drive Section 115/230 Vac Wiring Diagram

    6 Wiring Diagram 6 - 2 Drive Section 115/230 VAC Wiring Diagram (QC-S300/S30) Drive Section 115/230 VAC Wiring Diagram 6 - 2 - Connect to the conveyor motor at back side. Switching Power Supply (QC-S30F/QC-300F) Conveyor Motor (Only for F-tower)

  • Page 68: Wiring Diagram On Each Section (Qc-S300)

    6 - 3 - 1 Wiring Diagram on Each Section (QC-S300) 6 Wiring Diagram Q C - S 3 0 0 6 - 3 Wiring Diagram on Each Section (QC-S300) (1/2) Wiring Diagram on Each Section (QC-S300) 6 - 3 -...

  • Page 69: 24Vdc Wiring Diagram (Qc-S300/S300F)

    6 Wiring Diagram 6 - 3 Wiring Diagram on Each Section (QC-S300) Q C - S 3 0 0 (2/2) 24VDC Wiring Diagram (QC-S300/S300F) 6 - 3 - CON3 Switching Power Supply 24V BLK #22 #22 YEL QPM-725 QPM-725 AC115/230V...

  • Page 70: Wiring Diagram On Each Section (Qc-S30)

    6 - 4 - 1 Wiring Diagram on Each Section (QC-S30) 6 Wiring Diagram Q C - S 3 0 6 - 4 Wiring Diagram on Each Section (QC-S30) (1/2) Wiring Diagram on Each Section (QC-S30) 6 - 4 - Operation Back Side...

  • Page 71: Vdc Power Circuit Diagram (Qc-S30/Qc-S30F)

    6 Wiring Diagram 6 - 4 Wiring Diagram (QC-S30) Q C - S 3 0 (2/2) 24 VDC Power Circuit Diagram (QC-S30/QC-S30F) 6 - 4 - Switching Power Supply 24V D/WHT #22 AC115/230V D/WHT #22 YEL #22 50/60HZ D/YEL #22 +24V #22 D/YEL YEL #22...
  • Page 72 6 Wiring Diagram This page is intentionally left blank.

This manual is also suitable for:

Qc-s30

Table of Contents