Using The Touch Driver - Siemens SIMATIC IFP Basic Series Operating Instructions Manual

AUTO Color
When the VGA color display is abnormal, you can adjust the color as the following steps:
1. Click the monitor to select the monitor you want to adjust the color.
2. Open a picture which only contains black and white color as the background.
3. Select "Menu" --> "AUTO Color".
Note
The current color setting cannot be restored after you select "AUTO Color".
5.4

Using the touch driver

This chapter provides some tips on using the touch driver. For more information on using the
touch driver, refer to the driver help in the "Documentation and Drivers" DVD.
Open the On-Screen touch Keyboard
Siemens recommends you to turn on the On-Screen Keyboard for entering characters.
Go to Start, then select Settings --> Ease of Access --> Keyboard, and turn on the toggle
under Use the On-screen Keyboard.
A keyboard that can be used to move around the screen and enter text will appear on the
screen. The keyboard will remain on the screen until you close it.
Enable start On-Screen Keyboard each time you sign in
Go to Control Panel-->Ease of Access Center --> Use the computer without a mouse or
keyboard, Select the radio button next to "Use On-Screen Keyboard".
IFP Basic
Operating Instructions, 03/2019, A5E46178354 - AB
Operating the device
5.4 Using the touch driver
43