Secure With Mounting Clips - Siemens SIMATIC IFP Basic Series Operating Instructions Manual

Installing and connecting the device
3.2 Installing the IFP Basic
3.2.2

Secure with mounting clips

Positions of the mounting clips
To achieve the degree of protection for the device, the positions for the mounting clips
shown below must be adhered to.
The positions of the mounting clips are marked by stamps on the cutouts. Fit the mounting
clips in all the stamped cutouts.
The following table shows the type, number, and position of the mounting clips needed for
the respective devices.
Device
12" display
15" display
19" display
22" display
26
Type Quan-
tity
9
10
12
Mounting clips
Position on the device
Operating Instructions, 03/2019, A5E46178354 - AB
IFP Basic