Location And Function Of Parts; Lens Attachment Section (Front) And Connectors 1 - Sony CA-901K Operation Manual

Location and Function of Parts

Lens Attachment Section (Front) and Connectors 1

4 Lens connector 2
5 CCU connector
6 CA connector
7 AC OUT connector
1 Lens hold lever
Holds the lens by the tongue-like protrusion at the lens
bottom.
2 Lens hold lever locking knob
Locks the lens hold lever 1. Turn clockwise to
tighten, and counterclockwise to loosen.
3 Lens connector 1 (36-pin)
Connect to the camera connector of the lens.
4 Lens connector 2 (12-pin)
Connect to the LENS connector of the camera.
5 CCU (camera control unit) connector (triaxial
connector, Kings type for the CA-901K, and
Fischer type for the CA-901F)
Connect to the CAMERA connector of the CCU with
CCT-K5T/K10T/K20T/K50T/K100T/K150T/K200T
(for CA-901K) or CCT-5/10/20/50/100/150/200 (for
CA-901F) triaxial cable (available separately).
4(E)
Lens attachment section and connectors 1
6 CA (camera adaptor) connector (triaxial
connector, Kings type for the CA-901K, and
Fischer type for the CA-901F)
Connect to the CCU-550/550P connector of the CA-
550/550P camera adaptor.
7 AC OUT (AC power output) connector (3-pin)
AC power supply (CA-901K: 120 V AC, CA-901F:
220 or 240 V AC) for external equipment is available
via this connector.
When using the AC OUT connector, see the section "Input/
output connectors" on page 20(E) for the maximum triaxial
cable lengths for connection to the CCU connector.
Lens mouth
Pushrod exit
1 Lens hold lever
2 Lens hold lever
locking knob
3 Lens connector 1