Listening To Tracks In A Desired Sequence (Program Play); Adjusting The Sound (Virtual-Surround • 6-Band Equalizer); Varying The Virtual Sound To Create Different Acoustics; (Virtual-Surround) - Sony Walkman MZ-NF810CK Operating Instructions Manual

To play the bookmarked tracks
1
During playback, press P-MODE/
repeatedly until "
appears in the display.
2
Press the jog lever.
The Bookmarked tracks start playing,
starting with the smallest track
number.
To erase a bookmark
While playing the track for which you
want to erase the bookmark, press and
hold the jog lever until "
Note
If you open the lid, all bookmarks are canceled.
For the recorder operation, see
page 62.
Listening to tracks in a
desired sequence (Program
Play)
1
During playback, press
P-MODE/ repeatedly until
"PGM" appears in the display.
2
Slide the jog lever repeatedly to select
a track, and then press the jog lever to
enter that track.
Programmed sequence
Track
number
3
Repeat step 2 to program more tracks.
You can program up to 20 tracks.
4
After programming the tracks, press
and hold the jog lever for 2 seconds or
more.
The program is stored and playback
starts from the first track.
TrPLAY?"
OFF" appears.
z
The program play settings will remain in
memory even after playback finishes or is
stopped.
Note
All program settings are lost when the lid of the
recorder is opened.
For the recorder operation, see
page 62.
Adjusting the sound
(Virtual-Surround • 6-
Band Equalizer)
You can vary the virtual sound to create
different acoustics, or modify the sound to
suit your taste and store it for later use.
The following two effects can be selected:
V-SUR (Virtual-Surround VPT
Acoustic Engine)
Provides 4 kinds of virtual surround
conditions.
6-BAND EQUALIZER
Provides 6 different sound qualities
VOL+, –
Jog lever
Varying the virtual sound to
create different acoustics

(Virtual-Surround)

1
During playback, press SOUND
repeatedly to select "V-SUR".
2
Press and hold SOUND for 2 seconds
or more.
.
SOUND
continued
37