Omron CJ Series Connection Manual page 29

3
Select Create from the Options
Menu in the PLC IO Table
Window.
A confirmation dialog box on the
right is displayed. Check that
there is no problem and click
Yes.
A confirmation dialog box on the
right is displayed. Check that
there is no problem and click
Yes.
4
The Transfer from PLC Dialog
Box is displayed.
Select IO Table and SIO Unit
Parameters and click Transfer.
When the transfer is completed,
the Transfer Results Dialog Box
is displayed.
Check that the transfer was
normally executed by referring
to the message in the dialog
box.
When the I/O table is created
normally, the dialog box displays
as follows:
Transfer Success: 1 Unit
Transfer Unsuccessful: 0 Unit
Click OK.
7．Serial Communications Connection Procedure
24