Table of Contents
Advertisement
Installing a SIP
Step 7
Install the SPAs and SFP modules in the SPAs that use them. Refer to the
section.
Step 8
If you are replacing a SIP install the SPAs in the same bays as you noted in Step 2 under the
89
section.
Step 9
Install the interface cables.
Cisco ASR 9000 Series Aggregation Services Router SIP and SPA Hardware Installation Guide
92
Installing and Removing a SPA Interface Processor
SPA Installation and Removal, on page 94
Removing a SIP, on page
Advertisement
Table of Contents
