Creating A Party Environment; (Mhc-Gnx100 Only) - Sony MHC-GNX100, MHC-GNX90, MHC-GNX88, MHC-GNX80, MHC-GNX77, MHC-GNX70, MHC-GX9900, MHC-GNX66, MHC-GNX60 Operating Instructions Manual

Creating a party
environment

(MHC-GNX100 only)

You can create a party environment by using
X-ROUND for "moving" sound effect or/and
SOUND FLASH for flashing effect.
To enjoy the X-ROUND effect, place your front
and surround speakers at an equal distance from
your listening position (see "Positioning the
speakers for MHC-GNX100" on page 12).
Moving sound effect
— X-ROUND
Press one of the X-ROUND buttons to
select the X-ROUND mode you want.
The name of selected X-ROUND mode appears
and the X-ROUND lights up in the display.
Tip
To change between AUTO WAVE and MANUAL
WAVE, AUTO FADER and MANUAL FADER or
AUTO BAL and MANUAL BAL, press AUTO/
MANUAL repeatedly until the mode you want appears
in the display.
GB
30
Select To output sound
1)
AUTO WAVE , In circular motion
MANUAL
2)
WAVE
1)
AUTO FADER , From front speakers to surround
MANUAL speakers or vice versa
2)
FADER
1)
AUTO BAL , From left speakers to right
2)
MANUAL BAL speakers or vice versa
RANDOM In random position
TWISTER In circular motion like "twister"
1)
You can change the speed of sound movement by
turning the X-ROUND JOG clockwise or
counterclockwise.
2)
You can manually change the sound movement from
one speaker to another speaker by turning the
X-ROUND JOG clockwise or counterclockwise.
To cancel the X-ROUND effect
Press X-ROUND OFF. "X-ROUND OFF"
appears in the display.
Notes
• If you cannot get the sound effect you want, check
the speaker connections.
• When the headphones are connected to the PHONES
jack, X-ROUND mode automatically turned off and
you cannot change the setting.