Sony MHC-GNX100, MHC-GNX90, MHC-GNX88, MHC-GNX80, MHC-GNX77, MHC-GNX70, MHC-GX9900, MHC-GNX66, MHC-GNX60 Operating Instructions Manual page 23

Other operations
To Do this
Stop playback Press x.
Pause playback Press X. Press X again to resume
playback.
Turn m M clockwise or
Fast-forward or
counterclockwise (or press m or
rewind
M on the remote). To back to
normal playback, press nN
(or N on the remote).
b
Remove a tape Push
when playback is stopped.
Note
b
Do not push (Deck A) or
a tape, otherwise the tape could be damaged.
Tips
• When a tape is inserted, corresponding presence
indicator lights up in the display.
• If you press TAPE A/B (or TAPE on the remote)
while the system is turned off, the system turns on
automatically and "TAPE A" or "TAPE B" is
selected as the function.
• If you press nN (or N on the remote) during
"TAPE A" function and there is no tape in Deck A,
the system automatically switches to "TAPE B"
function when there is a tape in Deck B. Then,
playback will start and vice versa.
• You can also press FUNCTION on the remote
repeatedly to select "TAPE A" or "TAPE B".
B
(Deck A) or (Deck B)
B
(Deck B) while playing
GB
23