Pas7 Initiate Process Interrupt At The S7-Cpu - Siemens FM 458-1 DP Manual

3.2

PAS7 Initiate process interrupt at the S7-CPU

Symbol
Supplementary interrupt info ― DW
Trigger mode ― BO
Initiate interrupt ― BO
Brief description
Mode of operation
NOTE
I/O
Configuringdata
Function Blocks - FM 458-1 DP
Edition 03.2003
PAS7
IFO
Reset error ― BO RES
TMB
I
This function block, which initiates a process interrupt to the SIMATIC
S7-CPU, can only run with an FM 458-1 DP application module.
The function block initiates a process interrupt at the associated S7 CPU.
The IFO double word is transferred to the S7-CPU as supplementary
interrupt information.
A process interrupt is only acknowledged after the process interrupt
OBs (organization block) has been executed on the S7-CPU.
The block does not wait for the acknowledgment. The OB is
parameterized in the HWConfig for the associated S7-CPU.
The process interrupt is only initiated, if the S7-CPU is not processing a
process interrupt from the FM 458-1 DP application module.
Output QF has the value 1, if a new process interrupt is initiated,
although the last process interrupt was still not acknowledged or the
block was not configured on FM 458-1 DP.
Output QF has the value 0, if the acknowledgment from the S7-CPU has
been received, or if input RES has the value 1.
The interrupt is initiated as a function of the input TMB:
• for TMB = 0, if a signal changes from 0 to 1 at input I, or.
• for TMB = 1, if any signal transition occurs at input I.
IFO Supplementary interrupt information
RES Reset error
TMB Trigger mode, both edges
I Initiate an interrupt
QF Error output
Computation time [µs]
Available online
Can be configured in
Executed in
Special features
QF BO ― error output
FM 458-1 DP 3,3
no
Interrupt tasks
Cyclic tasks
Normal mode
-
Logic blocks
(default: 0)
(default: 0)
(default: 0)
(default: 0)
(default: 0)
3-3