Table of Contents
Advertisement
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
MODE
(PROGRESSIVE)
7
Press X/x to select the setting that
matches your TV type.
If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 68)
If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 68)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
NO
9
Press X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 21 to
24 (
through
A
A
• If you connect just a TV and nothing
else, select "NO." Quick Setup is
finished and connections are complete.
26
4:3 LETTER BOX
:
4:3 PAN SCAN
AUTO
AUDIO OUTPUT L/R
DIGITAL OUTPUT
).
D
B-1
• Select "AUDIO OUTPUT L/R." Quick
Setup is finished and connections are
complete.
B-2
16:9
• Select "DIGITAL OUTPUT." The
16:9
Setup Display for "DOLBY DIGITAL"
appears.
10
Press X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 22 to
24 (
B-2
• D-PCM (page 72)
D
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 72)
11
Press ENTER.
"DTS" is selected.
C-1
C-2
D
through
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DOLBY DIGITAL
DTS:
48kHz/96kHz PCM:
C-2
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
DOWNMIX:
DOLBY SURROUND
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
DTS:
48kHz/96kHz PCM:
).
OFF
STANDARD
ON
D-PCM
D-PCM
48kHz/16bit
OFF
STANDARD
ON
D-PCM
PCM
OFF
OFF
ON
Advertisement
Table of Contents
