Setting A New Equalization Curve Manually; Memorizing The New Equalization Curves - Aiwa CX-NMT720 Operating Instructions Manual

SETTING A NEW EQUALIZATION CURVE
MANUALLY
The equalization curve can be customized to suit your preference.
1
Press GEQ LOW.
The lowest level frequency indicator flashes for 4 seconds.
2 Within 4 seconds, turn MULTI JOG to adjust the
level of the lowest frequency.
3 Press GEQ HIGH.
The highest level frequency indicator flashes for 4 seconds.
4 Within 4 seconds, turn MULTI JOG to adjust the
level of the highest frequency.
The frequency level indicators between the lowest and the
highest are adjusted accordingly.
%
"
1
,
:, ,,,
,., ,.,
1
:4
Up to 4 customized equalization curves can be stored as the
manual modes Ml - M4.
7 Set a new equalization curve with HIGH, LOW,
and MULTI JOG.
See
"SETTING ANEW EQUALIZATION CURVE MANUALLY".
The created curve is displayed for 4 seconds.
2 Within 4 seconds, press ENTER.
'[M 1" flashes on the d"isplay for 4 seconds.
If this step is not completed within 4 seconds, press
GEQ
first to display "GEQ ON". Then press
ENTER
within 4
seconds.
3
4
Within 4 seconds, turn MULTI JOG to select one
of the manual modes Ml - M4 to store the curve.
Within 4 seconds, press ENTER.
The new equalization curve is stored.
To select the stored equalization curve
Press GEQ, and turn MULTI JOG to select one of the manual
modes Ml - M4 within 4 seconds.
9
ENGLISH